温馨提示：本站仅提供公开网络链接索引服务，不存储、不篡改任何第三方内容，所有内容版权归原作者所有
AI智能索引来源：http://www.tek.com/de/datasheet/ethernet-electrical-testing-software-5-6-series-mso
点击访问原文链接

Ethernet Electrical Testing Software for 5/6 SeriesMSO | Tektronix

进入原网站 导航首页
Ethernet Electrical Testing Software for 5/6 SeriesMSO | Tektronix Suche ein-/ausschalten Current Language × German (Germany)

Wählen Sie eine Sprache aus:

English FRANÇAIS DEUTSCH Việt Nam 简体中文 日本語 한국어 繁體中文 Menü umschalten x To find technical documents by model, try our Product Support Center Show all results → Produkte Oszilloskope und Tastköpfe Oszilloskope Hochgeschwindigkeits-Digitalisierern Tastköpfe und Zubehör Software Laborsoftware Datenanalyse Prüfautomatisierung Analysatoren Spektrumanalysatoren Parameter-Analysatoren Optische Modulationsanalysatoren Frequenzzähler Signalgeneratoren Arbiträr-/Funktionsgeneratoren Arbiträrsignalgeneratoren Quellen und Versorgungen SMUs (Source Measure Units) Gleichspannungsnetzteile Elektronische Gleichstromlasten Bidirektionale DC-Netzteile Elektrochemieprodukte Messgeräte Digitalmultimeter Datenerfassung und Schalten Schwachstromgerät/Empfindliche Geräte und Spezialgeräte Weitere Produkte Referenzlösungen Halbleiterprüfsysteme Komponenten und Zubehör Werksüberholte Prüfgeräte Product Selectors & Calculators ⇨ Keithley Produkte EA Elektro-Automatik Produkte Alle Produkte anzeigen Angebote Lösungen Industries Forschung Luftfahrt und Verteidigung Automotive Lehr- und Ausbildungslabore Medizinische Geräte und Systeme Leistungshalbleiter Erneuerbare Energien Halbleiterentwicklung und -fertigung Anwendungsgebiete 3D-Sensorik und bildgebende Charakterisierung EMI/EMV-Prüfung Serielle Hochgeschwindigkeitskommunikation Materialwissenschaft und Ingenieurswesen Militär und Regierung Leistungs- und Energieeffizienz RF Testing Test Automation Leitungsgebundene Kommunikation All Solutions Services Kalibrierungsservices Werkseitig verifizierte Kalibrierung Mit mehreren Marken konforme Kalibrierung Qualität und Akkreditierung Kalibrierungsfunktionen Standorte Servicestufen Nachverfolgung des Status der werkseitigen Kalibrierung Multimarken-Dienstleistungsanfrage ⇨ Asset-Managementservices CalWeb Managed Services Reparaturdienst Reparaturservices anfordern Reparaturstatus verfolgen Ersatzteile Garantiestatus prüfen EA Elektro-Automatik Service Tektronix Component Solutions Werksservicepläne All Services Unterstützung Produkte Datenblätter und Handbücher Bestellstatus Produktregistrierung Garantiestatus Parts Software Software Downloads Produktlizenz Ressourcen EA Elektro-Automatik Support FAQ Unterstützung Technische Unterstützung Wie und wo kaufen Kontaktieren Sie uns Partner Locator GSA Program Promotionen Einhaltung Codes exportieren Integrität und Compliance Produktrecycling (nur Europa) Product Security Qualitätssicherung Sicherheitsrückruf Rückverfolgbarkeit Unternehmen Über uns Blogs Kundengeschichten Veranstaltungen Pressemitteilung Partner Portal TekTalk-Benutzergemeinschaft Ein Angebot Einholen PRODUKTANGEBOT EINHOLENDIENSTLEISTUNGSANGEBOT EINHOLENVERTRIEB KONTAKTIEREN Suche ein-/ausschalten x To find technical documents by model, try our Product Support Center Show all results → Anmelden Current Language × German (Germany)

Wählen Sie eine Sprache aus:

English FRANÇAIS DEUTSCH Việt Nam 简体中文 日本語 한국어 繁體中文 Kontaktaufnahme

Live-Chat mit Tektronix-Vertretern. Verfügbar von 9 bis 17 Uhr CET Geschäftstage.

Anrufen

Kontaktieren Sie uns telefonisch unter

Verfügbar von 9 bis 17 Uhr CET Geschäftstage.

Kontaktaufnahme Kontaktieren Sie uns mit Anmerkungen, Fragen oder Feedback Download

Laden Sie Handbücher, Datenblätter, Software und vieles mehr herunter:

DOWNLOADTYP Alle anzeigen Products Datasheet Manual Software Marketing Document Faq Video MODELL ODER SCHLÜSSELWORT Feedback

Haben Sie Feedback für uns? Wir möchten gerne wissen, was Sie denken.

Egal ob positiv oder negativ, Ihr Feedback hilft uns dabei, den Tek.com-Service kontinuierlich zu verbessern. Lassen Sie es uns wissen, wenn Sie Probleme haben oder wenn wir unsere Aufgabe sehr gut erledigt haben.

Teilen Sie uns Ihre Meinung mit

Tektronix Software Ethernet Electrical Testing Software for 5/6 SeriesMSO Ethernet Electrical Testing Software for 5/6 SeriesMSO Option 5-CMENET/6-CMENET and 5-CMENETML/6-CMENETML Application Datasheet Please Login/Register to interact with the search results. Login × Datenblatt herunterladen Weitere Informationen MSO der Serie 5 B MSO der Serie 6 B Weitere Software Modelle entdecken

Online lesen:

Option 5-CMENET/6-CMENET and 5-CMENETML/6-CMENETML Application Datasheet Übersicht Technische Daten Bestellinformationen Get more visibility into your Ethernet designs with 1000BASE-T/100BASE-TX/10BASE-T PHY Measurement and Analysis on the 5 Series, 6 Series, and 6 Series B MSO. The combination of the oscilloscope, analysis software – Option 5-CMENET/6-CMENET, and a wide range of available analog probes enables you to perform detailed and accurate amplitude and timing measurements on your designs. The 12-bit analog-to-digital converters in the 5/6/6B Series MSO deliver precise measurement data.

Option 5-CMENET/6-CMENET is a standard specific application for Tektronix 5/6 Series and 6 Series B MSO oscilloscopes. This application includes compliance measurements that enable you to achieve new levels of debugging, efficiency, and accuracy. Option 5-CMENET/6-CMENET adds a long list of IEEE 802.3 and ANSI X3.263 specific measurements for different Ethernet standards to the standard jitter, timing, and signal quality measurements in the 5/6 Series MSO oscilloscopes.

Key features Comprehensive Ethernet PHY test coverage supporting multiple speeds. Highly optimized and intuitive user interface for quick test configuration and validation of electrical signals. Compliance and margin testing for accurate analysis and improved interoperability. Time-domain and frequency-domain measurements made with a single instrument. Jitter and timing measurements with and without filters. Amplitude and droop testing for transmitter performance. Detailed test reports with results, pass/fail info, test margin, and test specific waveform images. Configure test parameters and limits for debug and characterization. Configure multiple test runs and analyze the results. Preview the test mode waveform before running the tests. Additional Peak Distortion Vs Phase Offset and Error Values Vs Symbol Number plots for 1000BASE-T distortion tests. Ethernet compliance testing has some unique measurement challenges: Generating the disturbing signals requires you to generate pattern data and noise to create real-world noise for some measurements. You must test amplitude, timing, return loss, and template measurements for the ethernet standards: The 100BASE-TX standard outlines 12 tests per port plus CMRR and more The 1000BASE-T standard calls for 80 tests per port plus BER, CMRR, and more The 10BASE-T standard specifies 22 tests per port plus fault tolerance and CMRR Because of the large number of individual tests, compliance testing takes a lot of setup and measurement time, and makes repeatable measurement results difficult to achieve. Automated Ethernet physical layer compliance testingAutomated TekExpress Ethernet electrical testing with option 5-CMENET/6-CMENET requires an oscilloscope with minimum bandwidth of 1 GHz. This application provides automated compliance testing for Ethernet verification.

Executing all of the measurements manually is extremely time-consuming. TekExpress Ethernet software provides you an automation framework, enabling you to execute all of the measurements with less user intervention, such as when you need to change the connections.

TekExpress Ethernet test selection panelTekExpress Ethernet software allows you to choose complete or selective testing of any of the transmitter electrical specifications. Tests are configured by following a step-by-step process. The software sets up the oscilloscope and automates the testing, guiding you to accurate and repeatable results. It generates a comprehensive, date-stamped test report with pass/fail results, waveforms, and data plots.

Software navigation follows a logical workflow for quick test setups, changes and review of test results. Valid testing requires proper cabling, probes, and connections between fixtures, instruments, and the device under test (DUT). The software provides setup instructions for each test, with images and reference illustrations showing correct configurations.

TekExpress Ethernet software requires a Tektronix 5/6/6B Series MSO oscilloscope with Option 5-WIN/6-WIN or SUP5-WIN/SUP6-WIN (Microsoft Windows 10). This is a Windows application and the software displays TekExpress Ethernet software and test reports on the oscilloscope display. However, for convenience an external monitor may be connected to the 5/6/6B Series MSO so test controls and reports can be viewed on the external display, while signal acquisition is observed on the primary oscilloscope display.

TekExpress Ethernet results panel displaying tests results1000Base-T-Multi Pair testingThe 1000Base-T consists of four pairs of full duplex signals namely, Pair A, Pair B, Pair C, and Pair D. The compliance testing of the Ethernet testing requires all the four pairs/lanes of signals to be tested for all the parameters listed below the disturbing and non-disturbing options. 1000Base-T-Multi Pair testing setup

Test pair setup for four pairs

The traditional approach is testing of each pair sequentially. Most systems come with multiple ports. Testing four pairs of signals on each port sequentially can lead to very long test times and subsequently a longer time to market. The new approach tests all four pairs of signals at the same time in the non-disturbing signal mode testing. Parallel testing for pairs in non-disturbing signal mode leads to saving 30 minutes of test time as compared to running a single pair test four times. This leads to saving days of test time in characterization labs and hence, a faster time to market.

The multi-pair top up on 5-CMENET/6-CMENET enables both two pair and four pair parallel testing for non-disturbing signal mode. The two pair testing requires two probes and the four pair option requires four probes. The TC2 section of the TF-GBE-BTP provides parallel access to all the four pairs. The TekExpress application allows both options: Traditional approach of single lane testing and optionally, multi pair.

Multi Pair testing

Amplitude testsThe industry standards require the signals to have amplitudes within specified ranges to assure interoperability between devices. The amplitude tests vary with the signal speeds but include such parameters as peak or peak-to-peak amplitude, overshoot, common mode voltage, and positive/ negative pulse symmetry.

Timing testsTiming parameters of the signals are also specified by the standards. These tests include timing measurements such as rise time, fall time, and difference or symmetry between rise and fall times.

Jitter testsJitter tests quantify the timing variations of the edges of the signal, using specified test patterns. These jitter measurements include the contributions from duty cycle distortion and the baseline wander. Jitter is determined by accumulating waveforms, measuring the width of the accumulated points at the eye crossing. The peak-to-peak is inferred from minimum and maximum values in the tails of the histogram.

Template testsTemplate mask tests are often used to quickly verify that the transmitted signal meets industry-standard requirements. These template masks are defined so that signal distortions such as overshoot, jitter, incorrect rise and fall times, etc., will cause the mask test to fail.

TekExpress Ethernet running 1000BASE-T template measurement

TekExpress Ethernet running 100BASE-T AOI template

TekExpress Ethernet running 10BASE-T MAU temple testReturn Loss testThe return loss of the cabling system can affect interoperability of the system. The Ethernet standard defines the minimum amount of attenuation the reflected signal should have relative to the incident signal. The Return Loss test measures the impedance, typically over the range of 100 Ω ±15%. The TekExpress Ethernet ingeniously performs the Return Loss test for 85, 100, and 115 Ω (111 Ω for 10BASE-T) impedances as prescribed by the standard, using the 5/6/6B Series MSO and AFG/AWG series used for other tests, enabling efficient usage of resources.

The TekExpress application enables two ways of testing. One where the AFG/AWG can be used in automated solution and the other where the S-parameter files from a TTR500 can be used for report generation. In the case of AFG/AWG, the application supports return loss testing on upto two pairs at a time. This helps reduce test time by half and thus, saving considerable amount of time.

1000BASE-T Return Loss plotTest report generationTekExpress Ethernet allows you to quickly validate and generate detailed reports with images and setup details at the end of every execution.

Test fixturesThe TF-GBE Series of test fixtures supports many of the Ethernet compliance tests, providing convenient signal access, test points for accurate removal of disturbing signals, return loss calibration, and cross-connect circuits to connect to traffic generators and link partners. The TF-GBE-BTP is the basic test fixture package for 10/100/1000BASE-T tests. The TF-GBE-ATP is the advanced test fixture package which also includes a 1000BASE-T jitter test channel cable.

TF-GBE-BTP Basic Ethernet Test Fixture. Key measurementsTekExpress Ethernet Electrical Testing Software provides the following key measurements:

1000BASE-T (available with and without disturbing signal test option) With and without disturber

Template A Template B Template C Template D Template F Template H Peak A Peak B Peak C Peak D Droop G Droop J Distortion (with and without clock) Master Jitter - Filtered and unfiltered (with and without clock) Slave Jitter - Filtered and Unfiltered (with and without clock) Common Mode Voltage Return Loss

100BASE-TX AOI Template Rise Time Fall Time Rise/Fall Time Symmetry Differential Output Voltage Amplitude Symmetry Waveform Overshoot Duty Cycle Distortion Jitter Return Loss

10BASE-T Link Pulse (With and without TPM) TP_IDL (With and without TPM) MAU Template Harmonics Common Mode Voltage Differential Voltage Jitter Return Loss

Ordering informationRequired hardwareOscilloscope

6 Series or 6 Series B MSO oscilloscope with minimum bandwidth of 1 GHz (option 5-BW-1000 or 6-BW-1000)

5-WIN or 6-WIN (Removable SSD with Microsoft Windows 10 operating system)

Supported instruments

MSO54, MSO56, MSO58, MSO64, MSO64B, MSO66B, and MSO68B.

Required softwareApplication Options License type TekExpress Ethernet (1000BASE-T, 100BASE-TX, 10BASE-T) automated compliance test solution 5-CMENET

6-CMENET

New instrument license SUP5-CMENET

SUP6-CMENET

Upgrade license SUP5-CMENET-FL

SUP6-CMENET-FL

Floating license Multilane Ethernet (1000BASE-T, 100BASE-TX, 10BASE-T) automated compliance test solution 5-CMENETML1

6-CMENETML1

New Instrument license

Requires 5/6-CMENET

SUP5-CMENETML1

SUP6-CMENETML1

Upgrade license

Requires 5/6-CMENET

SUP5-CMENETML-FL1

SUP6-CMENETML-FL1

Floating license

Requires 5/6-CMENET-FL

Recommended probes and accessoriesRecommended Probes5/6-CMNET5/6-CMENETMLTDP 3500

22

Maximum 8 Probes are required for complete automation of 4 pairs. 6 probes are required for 4 pair jitter tests ifTX_TCLK is available. 5/6-CMENETML needs a minimum of 2 probes

TDP 1500

22

P62473

22

P62483 22

Recommended test fixturesTest Fixtures Vendor TF-GBE-BTP

Basic Ethernet Test Fixture

TF-GBE-ATP

Advanced Ethernet Test Fixture with Jitter Channel

TF-GBE-JTC

103 meter 1000BASE-T Jitter Test Channel Cable

TF-GBE-SIC

Short (4 inch or 0.1 meter) RJ-45 Interconnect Cable

Supported signal sources (for Disturbing signal and Return Loss testing)Instrument Models Arbitrary Function Generator AFG31000 Series Two Channels, AFG31252, AFG31152, AFG31102 or AFG3000 Series Two Channels AFG3252 Arbitrary Waveform Generator AWG5202 with option 250, 2HV and 2DC is recommended for NBaseT (2.5G/5G/10G) compliance testing. 1 5/6-CMENET is mandatory for all options 5/6-CMENETML.

Tektronix is ISO 14001:2015 and ISO 9001:2015 certified by DEKRA. Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats. Product Area Assessed: The planning, design/development and manufacture of electronic Test and Measurement instruments. 48W-61490-5

Über Tektronix

Tektronix ist das Unternehmen für Messtechnik, das sich durch Leistung auszeichnet und von den Möglichkeiten überzeugt ist. Tektronix entwickelt und fertigt Test- und Messlösungen, um die Komplexität zu durchbrechen und globale Innovationen zu beschleunigen.

ERFAHREN SIE MEHR ÜBER UNS

Unternehmen

Über uns Karriere Newsroom Ereignisse EA Elektro-Automatik

Hilfe und Lernen

Kontakt Kontakt Technischer Support Schulung und Weiterbildung Eigentümerressourcen Blog

Partner

Finden Sie einen Geschäftspartner

Verbinden Sie sich mit uns

Zusätzliche Links

© 2026 TEKTRONIX, INC.

Sitemap Privacy Nutzungsbedingungen Geschäftsbedingungen Impressum Call us at Feedback

智能索引记录