TekExpress Automotive Ethernet 100BASE-T1 and 1000BASE-T1 Signal Separation and PAM3 Analysis | Tektronix

TekExpress Automotive Ethernet 100BASE-T1 and 1000BASE-T1 Signal Separation and PAM3 Analysis | Tektronix Toggle Search Current Language × Vietnamese (Vietnam)

Select a language:

English FRANÇAIS DEUTSCH Việt Nam 简体中文 日本語 한국어 繁體中文 Toggle Menu x To find technical documents by model, try our Product Support Center Show all results → Sản phẩm Máy hiện sóng và que đo Máy hiện sóng Bộ số hóa tốc độ cao Que đo và Phụ kiện Phần mềm Phần mềm thiết bị để bàn Phân tích dữ liệu Tự động hóa kiểm tra Máy phân tích Máy phân tích phổ Máy phân tích thông số Máy phân tích điều biến quang học Máy đếm tần số Máy tạo tín hiệu Máy tạo chức năng tùy ý Máy tạo dạng sóng tùy ý Nguồn và Nguồn cung Thiết bị đo nguồn Bộ cấp nguồn DC Tải điện DC Bộ cấp nguồn DC hai chiều Sản phẩm điện hóa Máy đo Đồng hồ vạn năng kỹ thuật số Thu thập dữ liệu và chuyển mạch Dụng cụ mức thấp/nhạy cảm và Dụng cụ chuyên môn Sản phẩm bổ sung Giải pháp tham khảo Hệ thống kiểm tra chất bán dẫn Thành phần và Phụ kiện Thiết bị kiểm tra tân trang Product Selectors & Calculators ⇨ Sản phẩm của Keithley Sản phẩm EA Elektro-Automatik Xem tất cả sản phẩm Khuyến mãi Giải pháp Lĩnh vực hoạt động Nghiên cứu nâng cao Hàng không vũ trụ và Quốc phòng Ô tô Phòng thí nghiệm đào tạo và giảng dạy Hệ thống và thiết bị y tế Thiết bị bán dẫn công suất Năng lượng tái tạo Thiết kế và Sản xuất chất bán dẫn Ứng dụng Mô tả đặc điểm ảnh và cảm biến 3D Kiểm tra EMI/EMC Giao tiếp nối tiếp tốc độ cao Kỹ thuật và khoa học vật liệu Chính phủ và Quân đội power efficiency Đo kiểm vô tuyến Tự động hóa đo kiểm Giao tiếp có dây All Solutions Dịch vụ Dịch vụ hiệu chỉnh Hiệu chỉnh có nhà máy chứng nhận Hiệu chỉnh tuân thủ đa thương hiệu Chất lượng và Cấp phép Khả năng hiệu chỉnh Vị trí Cấp độ dịch vụ Theo dõi trạng thái hiệu chỉnh tại nhà máy Yêu cầu dịch vụ đa thương hiệu ⇨ Yêu cầu dịch vụ tại nhà máy ⇨ Dịch vụ quản lý tài sản CalWeb Dịch vụ được quản lý Dịch vụ sửa chữa Yêu cầu dịch vụ sửa chữa Theo dõi trạng thái sửa chữa Bộ phận Kiểm tra trạng thái bảo hành Dịch vụ EA Elektro-Automatik Giải pháp thành phần Tektronix Gói dịch vụ nhà máy Tất cả dịch vụ Hỗ trợ Các sản phẩm Bảng dữ liệu và hướng dẫn sử dụng Trạng thái đơn hàng Đăng ký sản phẩm Tình trạng bảo hành Parts Phần mềm Tải phần mềm Giấy phép sản phẩm Tài nguyên Hỗ trợ EA Elektro-Automatik FAQ Trung tâm hỗ trợ Hỗ trợ kỹ thuật Làm thế nào và ở đâu để mua Liên hệ với chúng tôi Nhà phân phối Chương trình GSA Khuyến mãi Sự tuân thủ Mã xuất khẩu Giới thiệu về chúng tôi Tái chế sản phẩm (Chỉ áp dụng cho Châu Âu) Bảo mật sản phẩm Đảm bảo chất lượng Thu hồi an toàn Khả năng truy xuất nguồn gốc Công ty About Us Blogs Câu chuyện của khách hàng Sự kiện Phòng tin tức Cổng thông tin đối tác Cộng đồng người dùng TekTalk Nhận báo giá NHẬN BÁO GIÁ SẢN PHẨMNHẬN BÁO GIÁ DỊCH VỤLIÊN HỆ BÁN HÀNG 400-820-5835 Toggle Search x To find technical documents by model, try our Product Support Center Show all results → Đăng nhập Current Language × Vietnamese (Vietnam)

Select a language:

English FRANÇAIS DEUTSCH Việt Nam 简体中文 日本語 한국어 繁體中文 Contact us

For product recommendations and technical support

Live Chat with Tek representatives. Available 6:00 AM - 4:30 PM

Call

Call us at

Available 6:00 AM – 5:00 PM (PST) Business Days

Contact US Contact us with comments, questions, or feedback Download

Download Manuals, Datasheets, Software and more:

DOWNLOAD TYPE Show All Products Datasheet Manual Software Marketing Document Faq Video MODEL or KEYWORD Feedback

Have feedback? We'd love to hear your thoughts.

Whether positive or negative, your feedback helps us continually improve the Tek.com experience. Let us know if you're having trouble or if we're doing an outstanding job.

Tell us what you think

Tektronix Phần mềm TekExpress Automotive Ethernet 100BASE-T1 and 1000BASE-T1 Signal Separation and PAM3 Analysis TekExpress Automotive Ethernet 100BASE-T1 and 1000BASE-T1 Signal Separation and PAM3 Analysis Signal Integrity and Protocol Decode Datasheet Please Login/register to save starred items to Your Library. Login × Download Datasheet More Information MSO 5 Series B MSO 6 Series B Explore more Software models

Read Online:

Signal Integrity and Protocol Decode Datasheet Overview Specifications Ordering Information For Automotive Ethernet designing, testing, and debugging, Tektronix offers the comprehensive PAM3 Signal Analysis, Signal Quality test, and Protocol Decode testing solution.

Key features Signal Separation software: Award winning Tektronix Signal Separation software (Patent pending) lets you perform Signal Analysis or Protocol Decode without affecting the ECU system or installing a direct coupler by cutting the Ethernet cable. Signal separation is available for 100BASE-T1 and 1000BASE-T1 Automotive Ethernet. PAM3 Analysis: You can perform PAM3 Analysis to measure Eye Opening, Eye Mask testing, Jitter Separation, and BER plot in real ECU environment for the Master ECU or Slave ECU. Enhanced Clock Recovery: Software clock recovery offers the industry's most robust clock recovery capability even from heavily impaired signals.

Signal Quality Test: You can perform Open Alliance TC8 Signal Quality test with an Eye Diagram instead of a Signal Quality Index (SQI) value. The Eye Diagram in a noise condition provides better insight compared to the SQI value. Automotive Ethernet Protocol Decode: The Tektronix Signal Separation solution enables decoding of 100BASE-T1 Automotive Ethernet using the Signal Separation technique. You can perform accurate protocol decoding without breaking the cable. Live Eye diagram and Protocol Decode: You can visualize eye diagrams and protocol decode in real time, to study the effects of noise and perform timing measurements. Noise Analysis for In-Car testing: Plot eye diagrams and perform noise analysis to study the effect of noise on your receiver. Comprehensive Reporting: Automated reporting with Pass/Fail screenshots of the waveforms. Automotive Ethernet overview The Autonomous Driving Assistance System (ADAS) and human-to-machine subsystems generate vast amount of data to transport through a vehicle. Requirements for greater integration between vehicle subsystems are driving fundamental architectural changes, moving from simple ring networks to more complex topologies, including gateways connected to an Automotive Ethernet backbone.

Automotive Ethernet 1000BASE-T1 (802.3bpTM) and 100BASE-T1 (802.3bwTM) standards are among the fastest growing technologies for in-vehicle networks.

Automotive Ethernet provides significant advantages including: PAM3 modulation supports high data rates and reliability

Unshielded and single twisted-pair cabling lowers cost and weight

Full-duplex communication allows devices to send and receive simultaneously on a link

Proven IT technology with reliable data throughput for safety critical systems

The integration of Automotive Ethernet technology is placing greater demands on comprehensive design validation to ensure interoperability and reliability between multiple ECUs and devices that will perform reliability in demanding environments. To meet strict compliance tests and have greater confidence in design margins operating under real world conditions, a complete testing solution is a necessity.

Automotive Ethernet and Full Duplex Communication

Automotive Ethernet operates as a full-duplex communication link over a twisted pair cable. The full-duplex communication along with PAM3 signaling adds complexity in validating the ECUs in the real world conditions.

To perform Signal Analysis over the link and Protocol Decode in a real system environment, automobile designers need to look at each link separately which requires the user to separate the signals before performing analysis. Unfortunately, many of the current testing solutions requires breaking the Automotive Ethernet cable to perform the testing. This introduces additional test challenges. The Tektronix PAM3 Signal Analysis application solves these issues with a comprehensive testing solution.

Use CasesCustomer DUT Type Job to be done PHY Silicon companies Automotive Ethernet PHY Silicon Compliance Test as per Open Alliance Protocol Test at the system level   Automotive T1 companies, Cable manufacturer   ECU Compliance and Interop test as per Open Alliance Signal Quality Test Protocol Test System: ECU to ECU, ECU to Sensor, Cable

System performance under noise Cable selection Performance Test Performance Test Manufacturing Variation Test   Automotive OEMIn-Car Testing   Performance Test Manufacturing Variation Test Performance Test under various scenarios Cracking DC Motor Protocol Test Debug

Reliability is critical in automotive electronics. Data must be transferred between sensors and ECUs without errors, under all conditions. As data rates increase, signal integrity analysis becomes more important to help one understand the effects of noise, cable length, cable layout, and other factors.

Signal separationAs Automotive Ethernet is full-duplex communication, both ECUs can send and receive the data simultaneously on the same link. To perform Signal Analysis or Protocol Decode in a real system environment, the traffic of the Master and the Slave ECU needs to be separated.

One approach to separate the full-duplex signal is to use a Directional coupler. This approach requires the user to cut the cables to install the Directional coupler. Using a Directional coupler adds its own Insertion loss and Return loss which can negatively impact the testing results. While it is possible to compensate for the loss at the setup level, the directional coupler approach disturbs the system, making it difficult to know if the errors are introduced by the additional hardware.

To avoid erroneous measurements, Tektronix award winning Signal Separation solution separates the full-duplex signal using the advanced software. The Signal Separation solution accesses the voltage and current waveform from either the Master or Slave Test point, or from both sides simultaneously using the Tektronix proprietary Signal Separation algorithm. This method displays true ECU signals (Master and Slave) without impacting the ECU system.

100BASE-T1 Signal Separation setupAutomotive Ethernet Signal Separation using FixtureThe Tektronix Signal Separation software can separate full-duplex traffic for Automotive Ethernet 100BASE-T1 and 1000BASE-T1 testing real ECU test conditions, including different cable lengths and types, different ECUs, ECU-to-Switch conditions, different noise conditions, and inside the car with the Automotive Ethernet connectivity.

Tektronix Signal Separation solution earned the top honors in the Test and measurement category in the second-year Leadership in Engineering Achievement Program (LEAP) Awards.

Refer to the Signal Access section to learn more about how to connect the voltage and current probes for different testing situations.

Full-duplex Signal Separation using software methodEase of use: It is easy to connect the voltage and current probes without disturbing the cables. You can directly connect probes to the ECU connector. If a fixture is needed to access signals, Tektronix can provide assistance to design a fixture to connect the voltage and current probes.

Live Signal Separation: Once the settings are configured, you can run signal separation in live mode. You can keep the oscilloscope in continuous RUN or Single RUN mode to study the eye diagram and the effect of noise in runtime mode.

Automation: The TekExpress Ethernet Signal Separation and PAM3 Analysis software is a completely Automated test solution. Using the Tektronix TekExpress automation platform, its user interface design guides you step-by-step to configure the system and perform analysis.

PAM3 Analysis: The following three levels of PAM3 introduce additional complexity in signaling and place new demands on the test methodology. The PAM3 analysis tool offers several measurement and visualization capabilities to make the task of validating Automotive Ethernet PAM3 designs more efficient.

PAM3 Measurement configuration: The configuration panel within the PAM3 analysis tool let you configure most elements for a PAM3 analysis run. The setup tool includes measurement source selection, clock recovery, and threshold configuration.

Measurement configuration

Clock recovery: The configurable PLL (Phase-Locked Loop) clock recovery function reliably extracts the symbol clock, even with highly impaired signals, and exports the reconstructed clock waveform to a reference channel where it is viewed.

Clock recoveryEqualizer and Pulse shaping: Automotive Ethernet uses proprietary receiver equalizer and pulse shaping filters. To mimic actual transmitter and receiver, the Tektronix signal separation solution offers you a defined equalizer and pulse shaping filter. You can now accurately perform eye diagram testing for Automotive Ethernet standards using self-defined coefficients for equalizer and pulse shape filters. Eye diagram before performing CTLE

Eye diagram after performing CTLEPAM3 measurements: The PAM3 analysis package provides a comprehensive set of measurements that offer greater insight into signal characteristics, speeding up validation or characterization of PAM3 designs with different cable length, noise conditions ECU configurations, and so on.

PAM3 measurementsPAM3 measurementsMeasurement group Measurements Eye diagram Eye Height Eye Width Eye Mask Jitter Random Jitter (DD) Deterministic Jitter (DD) Total Jitter @ BER Timing Rise Time (Symbol 0->1, -1->1 and -1->0) Fall time (Symbol 0->-1, 1->0 and 1 -> -1) PAM3 Modulation Linearity Visualization: A comprehensive set of plots let you visualize the measurement data. The plots provide insight into the signal characteristics and are useful for debugging.

The plot tool set enables interaction with the plots, helping you to focus on an area of interest for closer examination and further analysis.

Automotive Ethernet 100BASE-T1 Transmitter Eye diagramAutomotive Ethernet 100BASE-T1 Receiver Eye diagramBER Bathtub plotEye Mask testAutomotive Ethernet 1000BASE-T1 Transmitter EyeMulti-run for Signal Characterization: The PAM3 Analysis solution lets you to run the measurements multiple times to characterize ECU with different conditions. You can also set the PAM3 Automation software to pause on failure to debug the issue. All the waveforms from different runs can be saved in a folder to analyze and debug later. Preferences settings

Pass fail reportsCreating the test report documentation is quick and easy with a summary report in MHT or PDF format. The report provides Pass/Fail status and is automatically generated after the test execution is completed. The report includes test configuration details, waveform plots, oscilloscope displays, and margin analysis, to provide more insights into your design.

Detailed test reportSignal quality testThe Open Alliance TC8 Signal quality test requires adding Gaussian noise on the Ethernet cable to check the noise level at which the ECU full-duplex communication breaks. While users can read the SQI register value from the Automotive Ethernet PHY to find out Signal Quality Index, the SQI value will not represent the Eye diagram or any debug tools to find out the root cause of the problem.

With Tektronix Signal Separation, you can separate the full-duplex signal and display the Eye diagrams to debug further. The PAM3 Analysis tools let you debug the cause of the link failure. You can also perform a Protocol Decode test to check at what point the link fails.

Cable Performance Test, Production Pass/Fail Test, and ECU signal Integrity test: The Open Alliance has defined Automotive Ethernet cable tests covering Return Loss and Insertion loss. It is important to know how different cable lengths and cable types affect the Automotive Ethernet signal integrity.

Tektronix Signal Separation software lets you plot the Eye diagram for different cable lengths and cable types to compare their performance.

Eye diagram of a three meter cableMask test: You can define your own mask to perform Eye Mask testing for the different cable lengths, production pass/fail testing, or ECU performance testing. The TekExpress solution also provides predefined masks that can be used for your requirements. Measurement configuration

Protocol DecodeThe Tektronix Protocol Decode solution does not require a directional coupler to separate the traffic. Without disturbing the system, you can perform Protocol Decode at the design level, for ECU development, or for system debug for in-car testing. You can also perform Protocol Decode on multiple ECUs simultaneously to perform timing analysis or to debug. Users can define various protocol level conditions to stop the acquisition and debug on a specific event.

Automotive Ethernet Protocol Decode for full-duplex ECU6 Series B MSO Oscilloscope6 Series B MSO oscilloscopeWith up to 10 GHz analog bandwidth, 50 GS/s sample rates, lowest noise and highest resolution, the 6 Series B MSO oscilloscope has the performance you need to capture waveforms with the best possible signal fidelity.

At the heart of the 6 Series B MSO oscilloscope are 12-bit analog-to digital converters (ADCs) that provide 16 times the vertical resolution of traditional 8-bit ADCs. This resolution, combined with an extremely low-noise front end, allows you capture small signal details even on relatively large signals.

TekScope PC Waveform Analysis Software The Automotive Ethernet Signal Separation, PAM3 Analysis, and Protocol decode are available on PC-based TekScope advanced packages. Learn more about this at https://scope.tekcloud.com/#/packages100BASE-T1 Protocol decode on PC based TekScope Application

100BASE-T1 Eye diagram on PC based TekScope Application

Probing and test fixtures For direct probing of a DUT, a differential voltage probe with a bandwidth of ≥ 2 GHz and a current probe with a bandwidth of ≥ 1 GHz are recommended for Automotive Ethernet 1000BASE-T1. For Automotive Ethernet 100BASE-T1, a voltage probe with a bandwidth of >1 GHz and a current probe with a bandwidth of >120 MHz are recommended. The Tektronix TDP3500 differential voltage probe and CT6 current probe are recommended for 1000BASE-T1. Similarly, TDP1500 or TDP3500 differential voltage probe and TCP0030A or P6022 current probe are recommended for 100BASE-T1.

Accessing signals at the ECU level may require a fixture for signal separation. Contact Tektronix to learn more about custom fixture design for ECUs.

Ordering information Required hardware 5 Series MSO oscilloscope (2 GHz Option 5-BW-2000) or 6 Series B MSO oscilloscope with minimum bandwidth of 2 GHz (Option 6-BW-2500, 6-BW-4000, 6-BW-6000, 6-BW-8000, 6-BW-10000) for 1000BASE-T1

5 Series MSO oscilloscope (1 GHz Option 5-BW-1000, 5-BW-2000 or 6 Series B MSO oscilloscope with minimum bandwidth of 1 GHz (Option 6-BW-1000, 6-BW-2500, 6-BW-4000, 6-BW-6000, 6-BW-8000, 6-BW-10000) for 100BASE-T1

Option 5-WIN, Opt. 6-WIN or SUP5-WIN, SUP6-WIN (removable SSD with Microsoft Windows 10 operating system)

Required software Perpetual License:

Option 5-AUTOEN-SS or 6-AUTOEN-SS (Automotive Ethernet Signal Separation)

Option 5-PAM3 or 6-PAM3 (PAM3 Analysis)

Option 5-DJA or 6-DJA (Advanced Jitter and Eye Analysis)

Option 5-SRAUTOEN1 or 6-SRAUTOEN1 (100BASE-T1 Protocol Decode)

Recommended options Option 5-CMAUTOEN or 6-CMAUTOEN (TekExpress 100BASE-T1/1000BASE-T1 Automotive Ethernet Compliance)

Option 5-AUTO-BND or 6-AUTO-BND (Automotive Ethernet Compliance, Signal Separation, PAM3 Analysis (requires Option 5-⁠DJA), 100BASE-T1 Serial Decode (bundle option))

Option 5-RL-125M or SUP5-RL-125M (adds 125 M record length)

Option 5-SRAUTO or 6-SRAUTO, SUP5-SRAUTO or SUP6-SRAUTO (adds CAN, CAN FD, LIN, FlexRay Serial Bus Trigger and Decode)

Option 5-SREMBD or 6-SREMBD, SUP5-SREMBD or SUP6-SREMBD (adds I2C, SPI Serial Bus Trigger and Decode)

Probing TDP1500 or TDP3500 differential probe(s), TCP0030A (100BASE-T1) or P6022 (100BASE-T1) or CT6 (100/1000BASE-T1) current probe(s) Recommended test fixtures Contact Tektronix for ECU dependent fixtures

TekScope Opt TEKSCOPE PAM3 BND 1Y PAM3 / Signal Separation / 100BT1 Ethernet Protocol Automotive Solution (1 year subscription)

Opt TEKSCOPE PAM3 BND 3Y PAM3 / Signal Separation / 100BT1 Ethernet Protocol Automotive Solution (3 year subscription)

Recommended extras External PC monitor

USB keyboard

USB mouse

Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar. Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats. Product Area Assessed: The planning, design/development and manufacture of electronic Test and Measurement instruments.

Giới thiệu về Tektronix

Chúng tôi là công ty chuyên về đo lường cam kết mang lại hiệu suất và định hướng bởi các khả năng. Tektronix thiết kế và sản xuất các giải pháp kiểm tra và đo lường để phá vỡ tính phức tạp và tăng tốc đổi mới toàn cầu.

TÌM HIỂU THÊM VỀ CHÚNG TÔI

Công ty

Giới thiệu về chúng tôi Sự nghiệp Tin tức Sự kiện EA Elektro-Automatik

Trợ giúp và Đào tạo

Liên hệ với chúng tôi Liên hệ bộ phận Hỗ trợ kỹ thuật Trung tâm đào tạo Tài nguyên chủ sở hữu Blog

Đối tác

Tìm một đối tác

Kết nối với chúng tôi

Liên kết bổ sung

© 2026 TEKTRONIX, INC.

Sitemap Privacy Điều khoản sử dụng Điều khoản và điều kiện Call us at Feedback