温馨提示：本站仅提供公开网络链接索引服务，不存储、不篡改任何第三方内容，所有内容版权归原作者所有
AI智能索引来源：http://www.tek.com/vn/datasheet/usb-20-electrical-compliance-testing-software-5-6-series-mso
点击访问原文链接

USB 2.0 Electrical Compliance Testing Software for 5/6 Series MSO | Tektronix

进入原网站 导航首页
USB 2.0 Electrical Compliance Testing Software for 5/6 Series MSO | Tektronix Toggle Search Current Language × Vietnamese (Vietnam)

Select a language:

English FRANÇAIS DEUTSCH Việt Nam 简体中文 日本語 한국어 繁體中文 Toggle Menu x To find technical documents by model, try our Product Support Center Show all results → Sản phẩm Máy hiện sóng và que đo Máy hiện sóng Bộ số hóa tốc độ cao Que đo và Phụ kiện Phần mềm Phần mềm thiết bị để bàn Phân tích dữ liệu Tự động hóa kiểm tra Máy phân tích Máy phân tích phổ Máy phân tích thông số Máy phân tích điều biến quang học Máy đếm tần số Máy tạo tín hiệu Máy tạo chức năng tùy ý Máy tạo dạng sóng tùy ý Nguồn và Nguồn cung Thiết bị đo nguồn Bộ cấp nguồn DC Tải điện DC Bộ cấp nguồn DC hai chiều Sản phẩm điện hóa Máy đo Đồng hồ vạn năng kỹ thuật số Thu thập dữ liệu và chuyển mạch Dụng cụ mức thấp/nhạy cảm và Dụng cụ chuyên môn Sản phẩm bổ sung Giải pháp tham khảo Hệ thống kiểm tra chất bán dẫn Thành phần và Phụ kiện Thiết bị kiểm tra tân trang Product Selectors & Calculators ⇨ Sản phẩm của Keithley Sản phẩm EA Elektro-Automatik Xem tất cả sản phẩm Khuyến mãi Giải pháp Lĩnh vực hoạt động Nghiên cứu nâng cao Hàng không vũ trụ và Quốc phòng Ô tô Phòng thí nghiệm đào tạo và giảng dạy Hệ thống và thiết bị y tế Thiết bị bán dẫn công suất Năng lượng tái tạo Thiết kế và Sản xuất chất bán dẫn Ứng dụng Mô tả đặc điểm ảnh và cảm biến 3D Kiểm tra EMI/EMC Giao tiếp nối tiếp tốc độ cao Kỹ thuật và khoa học vật liệu Chính phủ và Quân đội power efficiency Đo kiểm vô tuyến Tự động hóa đo kiểm Giao tiếp có dây All Solutions Dịch vụ Dịch vụ hiệu chỉnh Hiệu chỉnh có nhà máy chứng nhận Hiệu chỉnh tuân thủ đa thương hiệu Chất lượng và Cấp phép Khả năng hiệu chỉnh Vị trí Cấp độ dịch vụ Theo dõi trạng thái hiệu chỉnh tại nhà máy Yêu cầu dịch vụ đa thương hiệu ⇨ Dịch vụ quản lý tài sản CalWeb Dịch vụ được quản lý Dịch vụ sửa chữa Yêu cầu dịch vụ sửa chữa Theo dõi trạng thái sửa chữa Bộ phận Kiểm tra trạng thái bảo hành Dịch vụ EA Elektro-Automatik Giải pháp thành phần Tektronix Gói dịch vụ nhà máy Tất cả dịch vụ Hỗ trợ Các sản phẩm Bảng dữ liệu và hướng dẫn sử dụng Trạng thái đơn hàng Đăng ký sản phẩm Tình trạng bảo hành Parts Phần mềm Tải phần mềm Giấy phép sản phẩm Tài nguyên Hỗ trợ EA Elektro-Automatik FAQ Trung tâm hỗ trợ Hỗ trợ kỹ thuật Làm thế nào và ở đâu để mua Liên hệ với chúng tôi Nhà phân phối Chương trình GSA Khuyến mãi Sự tuân thủ Mã xuất khẩu Giới thiệu về chúng tôi Tái chế sản phẩm (Chỉ áp dụng cho Châu Âu) Bảo mật sản phẩm Đảm bảo chất lượng Thu hồi an toàn Khả năng truy xuất nguồn gốc Công ty About Us Blogs Câu chuyện của khách hàng Sự kiện Phòng tin tức Cổng thông tin đối tác Cộng đồng người dùng TekTalk Nhận báo giá NHẬN BÁO GIÁ SẢN PHẨMNHẬN BÁO GIÁ DỊCH VỤLIÊN HỆ BÁN HÀNG 400-820-5835 Toggle Search x To find technical documents by model, try our Product Support Center Show all results → Đăng nhập Current Language × Vietnamese (Vietnam)

Select a language:

English FRANÇAIS DEUTSCH Việt Nam 简体中文 日本語 한국어 繁體中文 Contact us

Live Chat with Tek representatives. Available 6:00 AM - 4:30 PM

Call

Call us at

Available 6:00 AM – 5:00 PM (PST) Business Days

Contact US Contact us with comments, questions, or feedback Download

Download Manuals, Datasheets, Software and more:

DOWNLOAD TYPE Show All Products Datasheet Manual Software Marketing Document Faq Video MODEL or KEYWORD Feedback

Have feedback? We'd love to hear your thoughts.

Whether positive or negative, your feedback helps us continually improve the Tek.com experience. Let us know if you're having trouble or if we're doing an outstanding job.

Tell us what you think

Tektronix Phần mềm USB 2.0 Electrical Compliance Testing Software for 5/6 Series MSO USB 2.0 Electrical Compliance Testing Software for 5/6 Series MSO Option 5-CMUSB2/6-CMUSB2 Datasheet Please Login/register to save starred items to Your Library. Login × Download Datasheet CONFIGURE AND QUOTE SUP6-CMUSB2 SUP5-CMUSB2 More Information Phần mềm phân tích cho máy hiện sóng Product Support MSO 6 Series B MSO 5 Series B Explore more Software models

Read Online:

Option 5-CMUSB2/6-CMUSB2 Datasheet Overview Specifications Ordering Information USB 2.0 is a widely used system bus, due to its reliability and cost-effectiveness. The bus uses differential signaling and its bit rate ranges from 1.5 Mb/s (low speed) to 480 Mb/s (high speed). To ensure that USB 2.0 implementations are robust and interoperable, the standard defines a series of tests, including mask testing and parametric testing of low-speed, full-speed, and high-speed for devices, hosts, and hubs. This datasheet describes TekExpress USB2 Electrical Compliance testing software (option 5-CMUSB2/6-CMUSB2) for the 5/6 Series MSO, which automates the standard tests.

Even without the USB2 Electrical Testing Software option, the 5/6 Series MSO offers a versatile range of signal analysis tools for design validation and debug.

It is recommended to perform an in house compliance testing of the measurements using the USB2.0 Electrical Compliance testing software (5/6-CMUSB2) to identify and address the potential USB 2.0 design issues and then send the product for a formal certification. This reduces the product failure risk at the USB workshop or at the test house. This can save time, reduce the expenses and also identify specification conditions.

The USB Implementers Forum, Inc. (USB-IF) defines a suite of tests that determine compliance with the USB 2.0 standard. The goal of the testing is to confirm a design’s reliability and compatibility. Designers must pass all compliance tests recommended by the USB-IF to use the USB-IF logo on their packaging. However, many designers also use the tests to perform validation and margin testing, thereby increasing confidence in their designs.

Manually performing the standard tests is difficult and requires significant expertise, but the 5/6 Series MSO, equipped with Option 5-CMUSB2/6-CMUSB2, facilitates testing by handling oscilloscope setup, automating tests, evaluating pass/fail results, and report generation. The option is built on the proven TekExpress® automated serial compliance testing platform.

Design validation and debugTesting the design can easily be accomplished early in the design process and ahead of final certification testing by using the 5/6 Series MSO oscilloscope. The oscilloscope’s standard measurement set, along with the optional 5-DJA/6-DJA Advanced Jitter and Timing Analysis software supports several of the key compliance tests including:

Eye diagram analysis of USB signals Full characterization of jitter performance including TIE and histogram profiles Rise and fall time analysis Eye pattern analysis is a proven technique to evaluate long data streams of complex communication signals. Eye pattern display is standard in the 5/6 Series MSO, but Advanced Jitter and Eye Analysis software (option 5-DJA/6-DJA) provides 31 additional measurements and jitter decomposition algorithms to help get to root cause.

Tektronix also offers an optional 5-SRUSB2 and 6-SRUSB2 decode and trigger solution to perform USB specific protocol level analysis on the design.

Using the signal analysis and protocol decoder increases the likelihood of passing compliance tests, and can provide broader insight beyond the standard compliance tests.

Detailed analysis of a USB 2.0 signal using the 5/6 Series MSO measurement plots and optional Advanced Jitter Analysis (5-DJA/6-DJA) measurementsAutomated USB 2.0 testing with option 5-CMUSB2/6-CMUSB2 USB 2.0 electrical testing requires an oscilloscope with minimum bandwidth of 2 GHz. TekExpress USB2 software for the 5/6 Series MSO (5-CMUSB2/6-CMUSB2) provides automated compliance testing for USB 2.0 serial bus verification, including:

High-speed tests: Signal Quality, Receiver Sensitivity, Chirp, Reset, Reset from High Speed, Reset from Suspend, Resume, and Suspend Eye diagram, Jitter, Rise time, Fall time, and EOP width Packet Parameter and Monotonicity Power measurements: Droop and Inrush current TekExpress USB2 supports Device, Host, and Hub test suites and each suite includes approximately 50 measurements. Executing all the measurements manually is extremely time-consuming. TekExpress USB2 software has an automation framework built around these measurements, so that you can execute all the measurements with fewer clicks and intervene only to change connections.

TekExpress USB2 software allows you to select complete or selective testing of any of the transmitter electrical specifications. Tests are configured by following a step-by-step process. The software sets up the oscilloscope and automates the testing, guiding you to accurate and repeatable results. It generates a comprehensive, date-stamped test report with pass/fail results, waveforms, and data plots.

TekExpress USB2 DUT panel configures the DUT specific settingsSoftware navigation follows a logical workflow for quick test setups, changes and review of test results. Valid testing requires proper cabling, probes, and connections between fixtures, instruments, and the device under test (DUT). The software provides setup instructions for each test, with images and reference illustrations showing correct configurations.

Typical USB 2.0 setup configurationTekExpress USB2 software requires a Tektronix 5/6 Series MSO oscilloscope with Option 5-WIN/6-WIN or SUP5-WIN/SUP6-WIN (Microsoft Windows 10). This is a Windows application and the software displays TekExpress USB2 software and test reports on the oscilloscope display. However, for convenience an external monitor may be connected to the 5/6 Series MSO so test controls and reports can be viewed on the external display, while signal acquisition is observed on the primary oscilloscope display.

Displaying the high speed signal quality plot during executionFor each test, the DUT must be placed in specific operating modes using industry standard HS electrical test tool software (USBHSET.exe) from the USB Implementers Forum, Inc (USB-IF). The USBHSET tool runs on a Windows PC. The PC can be connected to the 5/6 Series MSO via LAN (Ethernet), allowing TekExpress USB2 to communicate with the USBHSET tool to automatically put the DUT in the correct mode for each test.

For each test or series of tests, you select the test of interest. The TekExpress software shows you how to configure the DUT with proper test fixtures, cables or probes. You initiate the test and the software performs all the necessary instrument setups and prompts you only when needed. Quick Pass/Fail tests substantiated with results makes USB 2.0 application the preferred solution for USB 2.0 physical-layer validation. The user-defined measurement limits and custom-mask testing also helps you to perform tolerance testing.

Jitter measurement results displayed in a table, along with limits and marginCustom Mask (red) with standard USB-IF mask (black) as referenceThe TekExpress USB2 application has a dedicated Plots panel, which helps you to analyze eye diagrams and signal quality. The panel also allows you to place cursors, zoom into the plot and save the plot as an image. This allows you to perform eye diagram analysis with custom masks and evaluate device margins.

Pass/fail reportsCreating test documentation is quick and easy with summary reports available in MHTML, CSV, or PDF formats. The report is generated automatically when the test execution is complete and provides Pass/Fail status for measurements. The report also includes test configuration details, waveform plots, oscilloscope displays and margin analysis, to provide more insights into your design.

TekExpress USB2 report showing setup details and measurement resultsProbing and test fixturesThe following probes are recommended for USB 2.0 testing: Differential probes: P6248, TDP1500, and TDP3500

Single-ended probes: P6245, TAP1500, and TAP2500

Current probe for Inrush current test: TCP0030A

Fixtures provide connection points for USB 2.0 electrical testing.

Refer to Ordering Information for recommended test fixtures.

USB 2.0 test fixture set SpecificationsUSB testsHost, Hub, and Device Signal Quality tests Eye Diagram Test, Jitter (JK, KJ, and Consecutive), Crossover Voltage Range, Signal Rate, End-of-Packet Width, Rising Edge Rate, and Falling Edge Rate High-speed testsReceiver Sensitivity, Chirp, Reset, Resume, Reset from High Speed, Reset from Suspend, Packet Parameter, and Edge Monotonicity Inrush Current checkData-sufficiency readout. Coulombs and Capacitance listed across inrush regions Droop test Volts readout Speed selectionLow-speed (LS), Full-speed (FS), and High-speed (HS) Signal directionUpstream and Downstream Test Point selectionNear End and Far End Report Generation formatMHTML, PDF, and CSV formats Ordering informationProduct requirements, options and recommended accessoriesRequired hardwareOscilloscope 5/6 Series MSO oscilloscope with minimum bandwidth of 350 MHz (option 5-BW-350/6-BW-1000 or higher) for Low-speed and Full-speed USB.5/6 Series MSO oscilloscope with minimum bandwidth of 2 GHz (option 5-BW-2000/6-BW-2500 or higher) for Low-speed, Full-speed, and High-speed USB.Supported instruments MSO54, MSO56, MSO58, MSO64, MSO66, MSO68Option 5-WIN or SUP5-WIN (removable SSD with Microsoft Windows 10 operating system). 6-WIN or SUP6-WIN (removable SSD with Microsoft Windows 10 operating system). Required softwareApplication Option License Type TekExpress USB 2.0 electrical testing software. 6-CMUSB2 New instrument license 5-CMUSB2 New instrument license SUP6-CMUSB2 Upgrade license SUP5-CMUSB2 Upgrade license SUP6-CMUSB2-FL Floating license SUP5-CMUSB2-FL Floating license Recommended optionsOption Application 6-DJA or SUP6-DJA Advanced Jitter and Eye Analysis measurements 5-DJA or SUP5-DJA Advanced Jitter and Eye Analysis measurements 6-SRUSB2 or SUP6-SRUSB2 Automated Trigger and Decode for USB 2.0 5-SRUSB2 or SUP5-SRUSB2 Automated Trigger and Decode for USB 2.0 ProbingRecommendedProbes Quantity TDP1500 or TDP3500 Differential probe 1 TAP1500 or TAP2500 Single-ended probe 3 TCP0030A Current probe 1 SupportedProbes Quantity P6248 1 P6245 3 Signal sourcesRecommendedTektronix AWG5200 signal source. SupportedTektronix AWG5000C, AWG7000C, AWG70000A signal source. Recommended test fixturesTest Fixtures Vendor USB 2.0 Std-A/Std-B Electrical Test FixtureAny USB-IF approved Test Fixture.Please visit www.usb.org for fixture details.

USB 2.0 Type-CTM Electrical Test FixtureAny USB-IF approved Test Fixture.Please visit www.usb.org for fixture details.

Recommended cables SMA to SMA Cable Pair (174-5771-xx). Recommended extrasExternal PC monitor, USB keyboard, and USB mouse. Additional informationTektronix offers a range of solutions for USB testing, including HSIC (High Speed Inter Connect) and USB 3.0. To see a comprehensive listing, and download the latest resources, visit http://tek.zhutiblog.com/com/usb.

For all probing related information, visit http://tek.zhutiblog.com/com/probe-selector.

For exploring other supported application and capabilities of latest Tektronix 5 series MSO oscilloscope, visit http://tek.zhutiblog.com/com/oscilloscope/5-series-mso-mixed-signal-oscilloscope.

For USB 2.0 standards documents and test procedures, as well as USBHSET software and test fixtures, please visit www.usb.org/home.

Tektronix is ISO 14001:2015 and ISO 9001:2015 certified by DEKRA. 61W-61351-4

Giới thiệu về Tektronix

Chúng tôi là công ty chuyên về đo lường cam kết mang lại hiệu suất và định hướng bởi các khả năng. Tektronix thiết kế và sản xuất các giải pháp kiểm tra và đo lường để phá vỡ tính phức tạp và tăng tốc đổi mới toàn cầu.

TÌM HIỂU THÊM VỀ CHÚNG TÔI

Công ty

Giới thiệu về chúng tôi Sự nghiệp Tin tức Sự kiện EA Elektro-Automatik

Trợ giúp và Đào tạo

Liên hệ với chúng tôi Liên hệ bộ phận Hỗ trợ kỹ thuật Trung tâm đào tạo Tài nguyên chủ sở hữu Blog

Đối tác

Tìm một đối tác

Kết nối với chúng tôi

Liên kết bổ sung

© 2026 TEKTRONIX, INC.

Sitemap Privacy Điều khoản sử dụng Điều khoản và điều kiện Call us at Feedback

智能索引记录