RSA5000 Series Spectrum Analyzers Datasheet | Tektronix

RSA5000 Series Spectrum Analyzers Datasheet | Tektronix Toggle Search Current Language × English

Select a language:

English FRANÇAIS DEUTSCH Việt Nam 简体中文 日本語 한국어 繁體中文 Toggle Menu x To find technical documents by model, try our Product Support Center Show all results → Products Oscilloscopes and Probes Oscilloscopes High Speed Digitizers Oscilloscope Probes Software Bench Software Data Analysis Test Automation Analyzers Spectrum Analyzers Parameter Analyzers Optical Modulation Analyzers Frequency Counters Signal Generators Arbitrary Function Generators Arbitrary Waveform Generators Sources and Supplies Source Measure Units DC Power Supplies DC Electronic Loads DC Bidirectional Supplies Battery Test & Simulation Meters Digital Multimeters Data Acquisition and Switching Low-level Instrument/Sensitive and Specialty Instruments Additional Products Reference Solutions Semiconductor Test Systems Components and Accessories Refurbished Test Equipment Product Selectors & Calculators ⇨ Keithley Products EA Elektro-Automatik Products All Products Promotions Solutions Industries Advanced Research Aerospace and Defense Automotive Education and Teaching Labs Medical Devices & Systems Power Semiconductor Renewable Energy Semiconductor Design and Manufacturing Applications 3D Sensing and Image Characterization EMI/EMC Testing High Speed Serial Communication Material Science and Engineering Power Efficiency RF Testing Test Automation All Solutions Services Calibration Services Factory Verified Calibration Multi-Brand Compliant Calibration Quality and Accreditation Calibration Capabilities Locations Service Levels Factory Calibration Status Tracking Multi-Brand Service Request ⇨ Factory Service Request ⇨ Asset Management Services CalWeb Field Service Managed Calibration Repair Services Factory Service Request Factory Repair Status Tracking Parts Warranty Status Testing Services Environmental Testing HALT & HASS Testing NEMA Compliance Testing Package Testing Shock-Vibration Testing EA Elektro-Automatik Service Tektronix Component Solutions Factory Service Plans All Services Support Products Datasheets & Manuals Order Status Product Registration Warranty Status Parts Software Software Downloads TekAMS (Software License Management) Resources EA Elektro-Automatik Support FAQs Support Center Technical Support How & Where to Buy Contact Us Distributor Locator GSA Program Promotions Compliance Export Codes Integrity and Compliance Product Recycling (Europe Only) Product Security Quality Assurance Safety Recall Traceability Company About Us Blogs Customer Stories Events Newsroom Partner Portal TekTalk User Community Get A Quote GET PRODUCT QUOTEGET SERVICE QUOTECONTACT SALES Toggle Search x To find technical documents by model, try our Product Support Center Show all results → Login Current Language × English

Select a language:

English FRANÇAIS DEUTSCH Việt Nam 简体中文 日本語 한국어 繁體中文 Contact us

Request Services Quote
Parts Ordering
Request Sales Contact
Request Technical Support
Need help on product selection? Chat with Sales Available 6:00 AM – 5:00 PM PST

Call

Call us at

Available 6:00 AM – 5:00 PM (PST) Business Days

Contact US Contact us with comments, questions, or feedback Download

Download Manuals, Datasheets, Software and more:

DOWNLOAD TYPE Show All Products Datasheet Manual Software Marketing Document Faq Video MODEL or KEYWORD Feedback

Have feedback? We'd love to hear your thoughts.

Whether positive or negative, your feedback helps us continually improve the Tek.com experience. Let us know if you're having trouble or if we're doing an outstanding job.

Tell us what you think

Tektronix Spectrum Analyzers & RF Signal Analyzers RSA5000 Series Spectrum Analyzers Datasheet RSA5000 Series Spectrum Analyzers Datasheet Please Login/register to save starred items to Your Library. Login × The products on this datasheet are no longer being sold by Tektronix.
View Tektronix Encore for reconditioned test equipment.
Check support and warranty status for these products.

Download Datasheet More Information RSA5000B Explore more Software models

Read Online:

Overview Specifications The RSA5000 Series Real Time Signal Analyzers replace conventional instruments, offering the measurement confidence and functionality you demand for everyday tasks. The RSA5000 Series offers industry-leading real time specifications and includes best minimum signal duration for 100% probability of intercept and best real time dynamic range. With the RSA5000 Series instruments, you get the functionality of a high-performance spectrum analyzer, wideband vector signal analyzer, and the unique trigger-capture-analyze capability of a real-time spectrum analyzer – all in a single package.

Key performance specifications+17 dBm 3rd order intercept at 2 GHz ±0.3 dB absolute amplitude accuracy to 3 GHz Displayed average noise level: –142 dBm/Hz at 26.5 GHz, –157 dBm/Hz at 2 GHz and –150 dBm/Hz at 10 kHz Internal Preamp available: DANL of -156 dBm/Hz at 26.5 GHz, -167 dBm/Hz at 2 GHz Phase noise: –113 dBc/Hz at 1 GHz and –134 dBc/Hz at 10 MHz carrier frequency, 10 kHz offset High-speed sweeps with high resolution and low noise: 1 GHz sweeps at 10 kHz RBW in Real time spurious free dynamic range of 80 dB with HD options Key featuresReduce Time-to-Fault and increase design confidence with Real-time Signal Processing Up to 3,125,000 spectrums per second, enables 100% probability of intercept for signals of 0.434 μs Swept DPX spectrum enables unprecedented signal discovery over full frequency range Advanced DPX including swept DPX, gap-free DPX spectrograms, and DPX zero span with real-time amplitude, frequency, or phase Triggers zero in on the Problem DPX density™ trigger on single occurrences as brief as 0.434 μs in frequency domain and distinguish between continuous signals vs infrequent events Advanced time-qualified, runt, and frequency-edge triggers act on complex signals as brief as 20 ns Capture the widest and deepest signals 25, 40, 85, 125, or 165 MHz acquisition bandwidths Spurious-free dynamic range of 80 dB over the entire acquisition bandwidth with HD options Acquire more than 5 seconds at 165 MHz bandwidth Wideband preselection filter provides image free measurements in entire analysis bandwidth up to 165 MHz More standard analysis than you expect in an everyday tool Measurements including channel power, ACLR, CCDF, OBW/EBW, spur search, EMI detectors Amplitude, frequency, phase vs. time, DPX spectrum, and spectrograms Correlated multi-domain displays Performance options for best real time and dynamic range and analysis options offer added value High dynamic range options offer unmatched 80 dBc spurious-free analysis in the widest acquisition bandwidth High performance DPX offers industry-leading minimum signal duration for 100% probability of intercept Optional software applications to add dedicated measurements for specific applications and standards AM/FM/PM modulation and audio measurements (Opt. 10) Phase noise and jitter (Opt. 11) Automated settling time measurements (frequency and phase) (Opt. 12) More than 30 pulse measurements, acquisition of more than 200,000 pulses possible for post analysis and cumulative statistics. (Opt. 20) General purpose modulation analysis of more than 20 modulation types (Opt. 21) Simple and complete APCO Project 25 transmitter compliance testing and analysis for Phase 1 (C4FM) and Phase 2 (TDMA) (Opt. 26) WLAN analysis for 802.11 a/b/g/j/p, 802.11n, and 802.11ac (Opts. 23, 24, 25) Noise figure and gain measurements (Opt. 14) Bluetooth® Analysis (Opt. 27 and Opt. 31) Manual and automatic measurement mapping plus signal strength function provides audio tone and visual indication of received signal strength (Opt. MAP) LTE™ FDD and TDD Base Station (eNB) Transmitter RF measurements (Opt. 28) The 5G NR analysis is supported on Windows 10 (RSA5BUP Opt. 5GNR)Signal Classification and Survey EMC/EMI pre-compliance and troubleshooting (Opt. 32) ApplicationsWideband radar and pulsed RF signals Frequency agile communications Broadband satellite and microwave backhaul links Education Long Term Evolution (LTE), Cellular 5G NR Cellular base station or user equipment transmitter testEMC/EMI pre-compliance and troubleshooting High performance spectrum and vector signal analysis, and much moreThe RSA5000 Series replaces conventional high-performance signal analyzers, offering the measurement confidence and functionality you demand for everyday tasks. A +17 dBm TOI and -157 dBm/Hz DANL at 2 GHz gives you the dynamic range you expect for challenging spectrum analysis measurements. All analysis is fully preselected and image free. You never have to compromise between dynamic range and analysis bandwidth by 'switching out the preselector'.

A complete toolset of power and signal statistics measurements are standard, including Channel Power, ACLR, CCDF, Occupied Bandwidth, AM/FM/PM, and Spurious measurements. Available Phase Noise and General Purpose Modulation Analysis measurements round out the expected set of high-performance analysis tools.

But, just being an excellent mid-range signal analyzer is not sufficient to meet the demands of today's hopping, transient signals.

The RSA5000 Series will help you to easily discover design issues that other signal analyzers may miss. The revolutionary DPX® spectrum display offers an intuitive live color view of signal transients changing over time in the frequency domain, giving you immediate confidence in the stability of your design, or instantly displaying a fault when it occurs. Once a problem is discovered with DPX®, the RSA5000 Series spectrum analyzers can be set to trigger on the event, capture a contiguous time record of changing RF events, and perform time-correlated analysis in all domains. You get the functionality of a high-performance spectrum analyzer, wideband vector signal analyzer, and the unique trigger-capture-analyze capability of a real-time spectrum analyzer - all in a single package.

Revolutionary DPX ® spectrum display reveals transient signal behavior that helps you discover instability, glitches, and interference. Here, three distinct signals can be seen. Two high-level signals of different frequency-of-occurrence are seen in light and dark blue, and a third signal beneath the center signal can also be discerned. The DPX Density™ trigger allows the user to acquire signals for analysis only when this third signal is present. Trigger On This™ has been activated, and a density measurement box is automatically opened, measuring a signal density 7.275%. Any signal density greater than the measured value will cause a trigger event.DiscoverThe patented DPX® spectrum processing engine brings live analysis of transient events to spectrum analyzers. Performing up to 3,125,000 frequency transforms per second, transients of a minimum event duration of 0.434 μs in length are displayed in the frequency domain. This is orders of magnitude faster than swept analysis techniques. Events can be color coded by rate of occurrence onto a bitmapped display, providing unparalleled insight into transient signal behavior. The DPX spectrum processor can be swept over the entire frequency range of the instrument, enabling broadband transient capture previously unavailable in any spectrum analyzer. In applications that require only spectral information, DPX provides gap-free spectral recording, replay, and analysis of up to 60,000 spectral traces. Spectrum recording resolution is variable from 125 µs to 6400 s per line.

TriggerTektronix has a long history of innovative triggering capability, and the RSA Series spectrum analyzers lead the industry in triggered signal analysis. The RSA5000 Series provides unique triggers essential for troubleshooting modern digitally implemented RF systems, including time-qualified power, runt, density, frequency, and frequency mask triggers.

Time qualification can be applied to any internal trigger source, enabling capture of 'the short pulse' or 'the long pulse' in a pulse train, or, when applied to the Frequency Mask Trigger, only triggering when a frequency domain event lasts for a specified time. Runt triggers capture troublesome infrequent pulses that either turn on or turn off to an incorrect level, greatly reducing time to fault.

DPX Density™ Trigger works on the measured frequency of occurrence or density of the DPX display. The unique Trigger On This™ function allows the user to simply point at the signal of interest on the DPX display, and a trigger level is automatically set to trigger slightly below the measured density level. You can capture low-level signals in the presence of high-level signals at the click of a button.

The Frequency Mask Trigger (FMT) is easily configured to monitor all changes in frequency occupancy within the acquisition bandwidth.

A Power Trigger working in the time domain can be armed to monitor for a user-set power threshold. Resolution bandwidths may be used with the power trigger for band limiting and noise reduction. Two external triggers are available for synchronization to test system events.

Trigger and Capture: The DPX Density™ Trigger monitors for changes in the frequency domain, and captures any violations into memory. The spectrogram display (left panel) shows frequency and amplitude changing over time. By selecting the point in time in the spectrogram where the spectrum violation triggered the DPX Density™ Trigger, the frequency domain view (right panel) automatically updates to show the detailed spectrum view at that precise moment in time.CaptureReal-time capture of small signals in the presence of large signals is enabled with greater than 70 dB SFDR in all acquisition bandwidths, even up to 165 MHz (Opt. B16x). The dynamic range of the wideband acquisition system can be improved to an unmatched 80 dB with the B85HD, B125HD, and B16xHD options. Capture once - make multiple measurements without recapturing. All signals in an acquisition bandwidth are recorded into the RSA5000 Series deep memory. Record lengths vary depending upon the selected acquisition bandwidth - up to 5.36 seconds at 165 MHz, 343.5 seconds at 1 MHz, or 6.1 hours at 10 kHz bandwidth with Memory Extension (Opt. 53). Acquisitions of up to 2 GB in length can be stored in MATLAB™ Level 5 format for offline analysis.

Most spectrum analyzers use narrowband tunable band pass filters, often YIG tuned filters (YTF) to serve as a preselector. These filters provide image rejection and improve spurious performance in swept applications by limiting the number of signals present at the first mixing stage. YTF's are narrow band devices by nature and are usually limited to bandwidths less than 50 MHz. These analyzers bypass the input filter when performing wideband analysis, leaving them susceptible to image responses when operating in modes where wideband analysis is required such as for real time signal analysis.

Unlike spectrum analyzers with YTF's, Tektronix Real Time Signal Analyzers use a wideband image-free architecture guaranteeing that signals at frequencies outside of the band to which the instrument is tuned don't create spurious or image responses. This image-free response is achieved with a series of input filters designed such that all image responses are suppressed. The input filters are overlapped by greater than the widest acquisition bandwidth, ensuring that full-bandwidth acquisitions are always available. This series of filters serves the purpose of the preselector used by other spectrum analyzers, but has the benefit of always being on while still providing the image-free response in all instrument bandwidth settings and at all frequencies.

AnalyzeThe RSA5000 Series offers analysis capabilities that advance productivity for engineers working on components or in RF system design, integration, and performance verification, or operations engineers working in networks, or spectrum management. In addition to spectrum analysis, spectrograms display both frequency and amplitude changes over time. Time-correlated measurements can be made across the frequency, phase, amplitude, and modulation domains. This is ideal for signal analysis that includes frequency hopping, pulse characteristics, modulation switching, settling time, bandwidth changes, and intermittent signals.

The measurement capabilities of the RSA5000 Series and available options and software packages are summarized in the following section.

5G NR modulation analysis and measurements option5G NR is among the growing set of signal standards, applications, and modulation types supported by Vector Signal Analysis (VSA) software. The VSA 5G NR analysis option provides comprehensive analysis capabilities in the frequency, time, and modulation domains for signals based on the 3GPP’s 5G NR specification.

By configuring result traces of spectrum, acquisition time, and NR specific modulation quality (e.g, EVM, frequency error, I/Q error) traces and tables, engineers can identify overall signal characteristics and troubleshoot intermittent error peaks or repeated synchronization failures.

Error Vector Magnitude (EVM) is a figure of merit used to describe signal quality. It does this by measuring the difference on the I/Q plane between the ideal constellation point of the given symbol versus the actual measured point. It can be measured in dB or % of the ideal sub-symbol, normalized to the average QAM power received, and display constellation of symbols vs ideal symbol. The EVM vs Symbol or EVM vs Time gives the EVM of OFDM symbols present in the number of symbols considered or the time within a slot.

For automated testing, SCPI remote interfaces are available to accelerate design, which enables the quick transition to the design verification and manufacturing phases.

Constellation, summary view, EVM, EVM vs. Symbol, Channel Power (CHP), Adjacent Channel Power (ACP), and Spectrum Emission Mask (SEM) supported in option 5G NR5G NR transmitter measurements core supported features5G NR option (RSA5BUP Opt. 5GNR) supports 5G NR modulation analysis measurements according to Release 15 and Release 16 of 3GPP’s TS38 specification, including:Analysis of uplink and downlink frame structures5G NR measurements and displays includingModulation Accuracy (ModAcc)Channel Power (CHP)Adjacent Channel Power (ACP)Spectrum Emission Mask (SEM)Occupied Bandwidth (OBW)Power Vs Time (PVT)2Error Vector Magnitude (EVM) Summary table with all scalar results for ModAcc, SEM, CHP, ACP, OBW, PVT, and EVM measurementsIn-depth analysis and troubleshooting with coupled measurements across domains, use multiple markers to correlate results to find root-cause.Saves reports in CSV format with configuration parameters and measurement resultsConfigurable parameters of PDSCH or PUSCH for each component carrierFor downlink, supported test models for FDD and TDD per 3GPP specifications

Measurement functionsStandard measurements Description Spectrum analyzer measurements Channel power, Adjacent channel power, Multicarrier adjacent channel power/leakage ratio, Spectrum emissions mask, Occupied bandwidth, xdB down, dBm/Hz marker, dBc/Hz marker Real time measurements DPX Spectrum with density measurements, DPX Spectrogram with spectrums vs. time, Zero-Span DPX with up to 50,000 updates/sec

Time domain and statistical measurements RF IQ vs Time, Power vs Time, Frequency vs Time, Phase vs Time, CCDF, Peak-to-Average Ratio Spur search measurement Up to 20 frequency ranges, user-selected detectors (Peak, Average, QP), filters (RBW, CISPR, MIL), and VBW in each range. Linear or log frequency scale. Measurements and violations in absolute power or relative to a carrier. Up to 999 violations identified in tabular form for export in .CSV format Analog modulation analysis measurement functions % amplitude modulation (+, -, total) frequency modulation (±Peak, +Peak, -Peak, RMS, Peak-Peak/2, frequency error) phase modulation (±Peak, RMS, +Peak, -Peak) DPX density measurement Measures % signal density at any location on the DPX spectrum display and triggers on specified signal density Measurement options Description AM/FM/PM modulation and audio measurements (Opt. 10) carrier power, frequency error, modulation frequency, modulation parameters (±Peak, Peak-Peak/2, RMS), SINAD, modulation distortion, S/N, THD, TNHD Phase noise and jitter measurements (Opt. 11) 10 Hz to 1 GHz frequency offset range, log frequency scale traces - 2: ±Peak trace, average trace, trace smoothing, and averaging Settling Time (Frequency and Phase) (Opt. 12) Measured frequency, Settling time from last settled frequency, Settling time from last settled phase, Settling time from trigger. Automatic or manual reference frequency selection. User-adjustable measurement bandwidth, averaging, and smoothing. Pass/Fail mask testing with 3 user-settable zones Noise Figure and Gain measurements (Opt. 14) Measurement displays of noise figure, gain, Y-factor, noise temperature, and tabular results. Single-frequency metering and swept-trace results are available. Support for industry-standard noise sources. Measures amplifiers and other non-frequency converting devices plus fixed local-oscillator up and down converters. Performs mask testing to user-defined limits. Built in uncertainty calculator. Advanced pulse measurements suite (Opt. 20) Pulse-Ogram™ waterfall display of multiple segmented captures, with amplitude vs time and spectrum of each pulse. Pulse frequency, Delta Frequency, Average on power, Peak power, Average transmitted power, Pulse width, Rise time, Fall time, Repetition interval (seconds), Repetition interval (Hz), Duty factor (%), Duty factor (ratio), Ripple (dB), Ripple (%), Droop (dB), Droop (%), Overshoot (dB), Overshoot (%), Pulse- Ref Pulse frequency difference, Pulse- Ref Pulse phase difference, Pulse- Pulse frequency difference, Pulse- Pulse phase difference, RMS frequency error, Max frequency error, RMS phase error, Max phase error, Frequency deviation, Phase deviation, Impulse response (dB), Impulse response (time), Time stamp. General Purpose Digital Modulation Analysis (Opt. 21) Error Vector Magnitude (EVM) (RMS, Peak, EVM vs time), Modulation error ratio (MER), Magnitude error (RMS, Peak, Mag error vs time), Phase error (RMS, Peak, Phase error vs time), Origin offset, Frequency error, Gain imbalance, Quadrature error, Rho, Constellation, Symbol table Flexible OFDM Analysis (Opt. 22) OFDM analysis for WLAN 802.11a/j/g and WiMAX 802.16-2004 WLAN 802.11a/b/g/j/p measurement application (Opt. 23)

All of the RF transmitter measurements as defined in the IEEE standard, as well as a wide range of additional measurements including Carrier Frequency error, Symbol Timing error, Average/peak burst power, IQ Origin Offset, RMS/Peak EVM, and analysis displays, such as EVM and Phase/Magnitude Error vs. time/frequency or vs. symbols/ subcarriers, as well as packet header decoded information and symbol table. Option 24 requires option 23.

Option 25 requires option 24.

WLAN 802.11n measurement application (Opt. 24) WLAN 802.11ac measurement application (Opt. 25) APCO P25 compliance testing and analysis application (Opt. 26) Complete set of push-button TIA-102 standard-based transmitter measurements with pass/fail results including ACPR, transmitter power and encoder attack times, transmitter throughput delay, frequency deviation, modulation fidelity, symbol rate accuracy, and transient frequency behavior, as well as HCPM transmitter logical channel peak ACPR, off slot power, power envelope and time alignment. Bluetooth Basic LE TX SIG measurements (Opt. 27) Presets for transmitter measurements defined by Bluetooth SIG for Basic Rate and Bluetooth Low Energy. Results also include Pass/Fail information. Application also provides packet header field decoding and can automatically detect the standard, including Enhanced Data Rate. Bluetooth 5 measurements (Opt. 31) Bluetooth SIG measurements for Bluetooth Low Energy version 5. Results also include Pass/Fail information. Application also provides Packet Header Field Decoding of LE Data Packets. Option 31 requires option 27.

LTE Downlink RF measurements (Opt. 28) Presets for Cell ID, ACLR, SEM, Channel Power and TDD Toff Power. Supports TDD and FDD frame format and all base stations defined by 3GPP TS version 12.5. Results include Pass/Fail information. Real-Time settings make the ACLR and the SEM measurements fast, if the connected instrument has enough bandwidth. 5G NR measurements (RSA5BUP Opt. 5GNR)Presets for Channel Power (CHP), Adjacent Channel Power (ACP), Power Vs Time (PVT)2, Modulation Accuracy (including Error Vector Magnitude (EVM), Frequency Error, IQ Error), EVM vs. Symbol, Occupied Bandwidth (OBW), Spectral Emission Mask (SEM), Constellation Diagram, and summary table with scalar results. Mapping and signal strength (Opt. MAP) Both manual and automatic drive test are supported by built-in mapping software. Commercial off-the-shelf 3rd party GPS receiver supported via USB or Bluetooth® connection. Supports MapInfo format and scanned version maps. Also supports exporting to popular Google Earth and MapInfo map format for post analysis. Signal strength measurement provides both a visual indicator and audible tone of signal strength. RSAVu Analysis Software W-CDMA, HSUPA. HSDPA, GSM/EDGE, CDMA2000 1x, CDMA2000 1xEV-DO, RFID, Phase noise, Jitter, IEEE 802.11 a/b/g/n WLAN, IEEE 802.15.4 OQPSK (Zigbee), Audio analysis Signal Classification The signal classification application enables expert systems guidance to aid the user in classifying signals. It provides graphical tools that allow you to quickly create a spectral region of interest, enabling you to classify and sort signals efficiently. EMC/EMI Pre-compliance and troubleshooting (Opt. 32) This option supports many predefined limit lines. It also adds a wizard for easy setup of recommended antennas, LISN, and other EMC accessories with a one-button push. When using the new EMC-EMI display, you can accelerate the test by applying the time consuming quasi peak only on failures. This display also provides a push-button ambient measurement. The Inspect tool lets you measure frequencies of interest locally, removing the need for scanning. Swept DPX can capture low-probability events across spans greater than the real time bandwidth. Here, a 1 GHz sweep views the activity form 1.9 GHz to 2.9 GHz from an off-air antenna. Number signals in the 1.9 GHz cell band are seen, and significant activity in the 2.4 GHz ISM band is apparent. The density measurement both has been used on the largest signal near the center, displaying approximately 3.5% occupancy.In this illustration, a single region has been selected. Since we have declared this to be an 802.11g signal, the spectrum mask for the 802.11g signal is shown overlaid in the region. The signal is a close match to the spectrum mask, However we can see some interferences with some likely Bluetooth signals in the ISM bandTime-correlated views in multiple domains provide a new level of insight into design problems not possible with conventional analyzers. Here, modulation quality and the constellation measurements are combined with the continuous monitoring of the DPX ® spectrum display.Spurious Search - Up to 20 noncontiguous frequency regions can be defined, each with their own resolution bandwidth, video bandwidth, detector (peak, average, quasi-peak), and limit ranges. Test results can be exported in .CSV format to external programs, with up to 999 violations reported. Spectrum results are available in linear or log scale.The EMC pre-compliance solution can be added with option 32. It supports many predefined limit lines. It also adds a wizard for easy setup of recommended antennas, LISN, and other EMC accessories with a one-button push. When using the new EMC-EMI display, you can accelerate the test by applying the time consuming quasi peak only on failures. This display also provides a push-button ambient measurement. The Inspect tool lets you measure frequencies of interest locally, removing the need for scanning.Audio monitoring and modulation measurements simultaneously can make spectrum management an easier, faster task. Here, the DPX spectrum display shows a live spectrum of the signal of interest and simultaneously provides demodulated audio to the internal instrument loudspeaker. FM deviation measurements are seen in the right side of the display for the same signal.Phase noise and jitter measurements (Opt. 11) on the RSA5000 Series may reduce the cost of your measurements by reducing the need for a dedicated phase noise tester. Outstanding phase noise across the operating range provides margin for many applications. Here, phase noise on a 13 MHz carrier is measured at -119 dBc/Hz at 10 kHz offset. The instrument phase noise of Settling time measurements (Opt. 12) are easy and automated. The user can select measurement bandwidth, tolerance bands, reference frequency (auto or manual), and establish up to 3 tolerance bands vs. time for Pass/Fail testing. Settling time may be referenced to external or internal trigger, and from the last settled frequency or phase. In the illustration, frequency settling time for a hopped oscillator is measured from an external trigger point from the device under test.DPX Zero-span produces real-time analysis in amplitude, frequency, or phase vs. time. Up to 50,000 waveforms per second are processed. DPX Zero-span ensures that all time-domain anomalies are immediately found, reducing time-to-fault. Here, three distinct pulse shapes are captured in zero-span amplitude vs. time. Two of the three waveforms occur only once in 10,000 pulses, but all are displayed with DPX.Analysis options for 802.11 standards are available. Here, an 802.11ac 160 MHz bandwidth signal is analyzed, with displays of EVM vs. subcarrier number and symbol number, channel response vs subcarrier with a summary of WLAN measurements, and the DPX spectrum of the analyzed signal. An EVM of -44.26 dB and other signal measurements are seen in the summary panel.DPX Spectrograms provide gap-free spectral monitoring for up to days at a time. 60,000 traces can be recorded and reviewed, with resolution per line adjustable from 125 µs to 6400 s.Noise Figure and Gain measurements (Option 14) help you to quickly and easily measure your device using the RTSA and a noise source. This image shows the measurement summary table with graphs of noise temperature, gain, noise figure and Y-factor.The wide-bandwidth, high dynamic range options (B85HD, B125HD, and B16xHD) offer unmatched real time spectrum analysis dynamic range. Two 16-bit, 200 MS/sec digitizers are interleaved, resulting in 400 MS/sec acquisitions with a typical spurious free dynamic range of -80 dBc, up to 10 dB better than other commercially available instruments. Here, a signal at 3 GHz is measured at -13.71 dBm, with the largest spurious signal from the digitizer -87.89 dB below the carrier.Fast validation of LTE base station transmitter with push button preset, and pass/fail informationCumulative statistics provides timestamps for Min, Max values as well as Peak to Peak, Average and Standard deviation over multiple acquisitions, further extending the analysis. Histogram shows you outliers on the right and leftPulse-Ogram displays a waterfall of multiple segmented captures, with correlated amplitude vs time and spectrum of each pulse. Can be used with an external trigger to show target range and speed Specifications All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Model overviewRSA5103B RSA5106B RSA5115B RSA5126B Frequency range 1 Hz - 3 GHz 1 Hz - 6.2 GHz 1 Hz - 15 GHz 1 Hz - 26.5 GHz Real-time acquisition bandwidth 25 MHz, 40 MHz, 85 MHz, 125 MHz, 165 MHz Minimum Event Duration for 100% POI at 100% amplitude 2.7 μs at 165 MHz BW (0.434 us, Opt. 300)

2.8 μs at 85 MHz BW (0.551 us, Opt. 300)

3.0 μs at 40 MHz BW (0.79 us, Opt. 300)

3.2 μs at 25 MHz BW (0.915 us, Opt. 300)

SFDR (typical) >75 dBc (25/40 MHz) >73 dBc (85/165 MHz)

≥ 80 dBc (Opts. B85HD, B125HD, B16xHD) Trigger modes Free run, Triggered, FastFrame Trigger types Power, Frequency mask, Frequency edge, DPX density, Runt, Time qualified Frequency relatedReference frequency Specification Standard Option PFR Conditions Initial accuracy at cal ± 1 x 10 -6 ± 1 x 10 -7 After 10 minute warm-up Aging per day 1 x 10 -8 1 x 10 -9 After 30 days of operation First year aging (typical) 1 x 10 -6 7.5 x 10 -8 After 1 year of operation Aging per 10 years 3 x 10 - 7 After 10 years of operation Temperature drift 2 x 10 -61 x 10 -7 From 5 to 40 °C Cumulative error (temperature + aging, typical) 3 x 10 -64 x 10 -7 Within 10 years after calibration Reference output level >0 dBm (internal or external reference selected), +4 dBm, typical External reference input frequency Every 1 MHz from 1 to 100 MHz plus 1.2288 MHz, 4.8 MHz, and 19.6608 MHz. External input must be within ± 1 x 10 -6 (Std), ± 3 x 10 -7 (Opt PFR) to stated input External reference input frequency requirements Spurious level on input must be Spurious Input level range –10 dBm to +6 dBm Center frequency setting resolution 0.1 Hz Frequency marker readout accuracy ±(RE × MF + 0.001 × Span + 2) Hz (RE = Reference frequency error) (MF = Marker frequency (Hz)) Span accuracy ±0.3% of span (Auto mode) Trigger relatedTrigger event source RF input, Trigger 1 (front panel), Trigger 2 (rear panel), Gated, Line Trigger setting Trigger position settable from 1 to 99% of total acquisition length Trigger combinatorial logic Trigger 1 AND trigger 2 / gate may be defined as a trigger event Trigger actions Save acquisition and/or save picture on trigger Power level triggerLevel range 0 dB to –100 dB from reference level Accuracy For trigger levels >30 dB above noise floor, 10% to 90% of signal level Level ≥ –50 dB from reference level ±0.5 dB From ±1.5 dB Trigger bandwidth range At maximum acquisition bandwidth Standard (Opt. B25) 4 kHz to 10 MHz + wide open Opt. B40 4 kHz to 20 MHz + wide open Opt. B85/B16x 11 kHz to 40 MHz + wide open Trigger position timing uncertainty 25/40 MHz acquisition BW, 20 MHz trigger BW Uncertainty = ±15 ns 25/40 MHz acquisition BW, Max Trigger BW Uncertainty = ±12 ns 85/125/165 MHz acquisition BW, 60 MHz Trigger BWUncertainty = ±5 ns 85/125/165 MHz acquisition BW, Max Trigger BWUncertainty = ±4 ns Trigger re-arm time, minimum (fast frame on) 10 MHz acquisition BW ≤25 μs 40 MHz acquisition BW≤10 μs 85/125 MHz acquisition BW≤5 μs 165 MHz acquisition BW≤5 μs Minimum event duration 25 MHz acquisition BW 25 ns 40 MHz acquisition BW 25 ns 85/125 MHz acquisition BW6.2 ns 165 MHz acquisition BW 6.2 ns External trigger 1Level range -2.5 V to +2.5 V Level setting resolution 0.01 V Trigger position timing uncertainty 50 Ω input impedance >20 MHz to 40 MHz acquisition BW±20 ns >40 MHz to 80 MHz acquisition BW±13.5 ns >80 MHz to 165 MHz acquisition BW±11 ns Input impedance Selectable 50 Ω/5 kΩ impedance (nominal) External trigger 2Threshold voltage Fixed, TTL Input impedance 10 kΩ (nominal) Trigger state select High, Low Trigger outputVoltage Output current High >2.0 V Low Frequency mask triggerMask shape User defined Mask point horizontal resolution Level range 0 dB to –80 dB from reference level Level accuracy30 to –50 dB from reference level±(Channel response + 1.0 dB)–50 dB to –70 dB from reference level±(Channel response + 2.5 dB)Span range 100 Hz to 25 MHz (Opt. B25) 100 Hz to 40 MHz (Opt. B40) 100 Hz to 85 MHz (Opt. B85, B85HD) 100 Hz to 125 MHz (Opt. B125, B125HD) 100 Hz to 165 MHz (Opt. B16x, B16xHD) Trigger position uncertainty Span = 25 MHz (Opt. B25) ±13 μs (RBW ≥ 300 kHz)

±7 μs (Opt. 09)

Span = 40 MHz (Opt. B40) ±13 μs (RBW ≥ 300 kHz)

±6 μs (Opt. 09)

Span = 85 MHz (Opt. B85) ±10 μs (RBW ≥ 1 MHz)

±3 μs (Opt. 09)

Span = 165 MHz (Opt. B16x) ±9 μs (RBW ≥ 1 MHz)

±3 μs (Opt. 09)

Minimum signal duration for 100% probability of trigger at 100% amplitude Frequency-Mask and DPX signal processing (Option 300 with Option 09) Minimum signal duration, 100% probability of intercept, Frequency-Mask and DPX density trigger (μs)4Span (MHz) RBW (kHz) FFT Length (points) Spectrums / sec Option 300 + Option 09 Standard Option 300 + Option 09 Full amplitude -3 dB 165 MHz 20000 1024 390,625 3,125,000 0.434 0.334 10000 1024 390,625 3,125,000 0.557 0.349 1000 1024 390,625 3,125,000 2.7 0.662 300 2048 195,313 195,313 13.1 6.1 100 8192 48,828 48,828 44.5 23.4 30 32768 12,207 12,207 161.9 91.7 25 32768 12,207 12,207 178.0 93.6 125 MHz 10000 1024 390,625 3,125,000 0.551 0.348 1000 1024 390,625 3,125,000 2.7 0.662 500 1024 390,625 3,125,000 5.1 1.2 300 2048 195,313 195,313 13.1 6.1 100 4096 97,656 97,656 44.5 13.2 30 16384 24,414 24,414 120.9 50.7 20 32768 24,414 24,414 201.9 96.5 85 MHz 10000 1024 390,625 3,125,000 0.55 0.348 1000 1024 390,625 3,125,000 2.7 0.662 500 1024 390,625 3,125,000 5.1 1.2 300 1024 390,625 3,125,000 8.3 1.9 100 4096 97,656 97,656 34.2 13.2 30 16384 24,414 24,414 121.0 50.7 20 16384 24,414 24,414 161.0 55.6 40 MHz 5000 1024 390,625 3,125,000 0.79 0.377 1000 1024 390,625 3,125,000 2.7 0.663 300 1024 390,625 3,125,000 8.3 1.9 100 2048 195,313 195,313 29.1 8.1 30 4096 97,656 97,656 90.4 21.8 20 8192 48,828 48,828 140.7 36.3 10 16384 24,414 24,414 281.3 72.6 25 MHz 3800 1024 390,625 3,125,000 0.915 0.392 1000 1024 390,625 3,125,000 2.7 0.664 300 1024 390,625 3,125,000 8.3 1.9 200 1024 390,625 3,125,000 12.3 2.8 Frequency-Mask and DPX signal processing Minimum signal duration, 100% probability of intercept, Frequency-Mask and DPX density trigger (μs)4Span (MHz) RBW (kHz) FFT Length (points) Spectrums / sec Standard Opt. 09 Full amplitude -3 dB Full amplitude -3 dB 165 MHz 20000 1024 390,625 15.5 15.4 2.7 2.6 10000 1024 390,625 15.6 15.4 2.8 2.6 1000 1024 390,625 17.8 15.7 5.0 2.9 300 2048 195,313 23.4 16.3 13.1 6.1 100 8192 48,828 44.5 23.4 44.5 23.4 30 32768 12,207 161.9 91.7 161.9 91.7 25 32768 12,207 178.0 93.6 178.0 93.6 125 MHz 10000 1024 390,625 15.6 15.4 2.8 2.6 1000 1024 390,625 17.8 15.7 5.0 2.9 500 1024 390,625 20.2 15.9 7.4 3.1 300 2048 195,313 23.4 16.3 13.1 6.1 100 4096 97,656 44.5 23.4 34.2 13.2 30 16384 24,414 120.9 50.7 120.9 50.7 20 32768 24,414 201.9 96.5 201.9 96.5 85 MHz 10000 1024 390,625 15.6 15.4 2.8 2.6 1000 1024 390,625 17.8 15.7 5.0 2.9 500 1024 390,625 20.2 15.9 7.4 3.1 300 1024 390,625 23.4 16.3 10.6 3.5 100 4096 97,656 44.5 23.4 34.2 13.2 30 16384 24,414 121.0 50.7 121.0 50.7 20 16384 24,414 161.0 55.6 161.0 55.6 40 MHz 5000 1024 390,625 15.8 15.4 3.0 2.6 1000 1024 390,625 17.8 15.7 5.0 2.9 300 1024 390,625 23.3 16.3 10.5 3.5 100 2048 195,313 39.4 18.3 29.1 8.1 30 4096 97,656 90.4 21.8 90.4 21.8 20 8192 48,828 140.7 36.3 140.7 36.3 10 16384 24,414 281.3 72.6 281.3 72.6 25 MHz 3800 1024 390,625 16.0 15.4 3.2 2.6 1000 1024 390,625 17.7 15.7 4.9 2.9 300 1024 390,625 23.4 16.3 10.6 3.5 200 1024 390,625 27.4 16.8 14.6 4.1 Advanced triggersDPX density trigger Density range 0 to 100% density Horizontal range 0.25 Hz to 25 MHz (Opt. B25)

0.25 Hz to 40 MHz (Opt. B40)

0.25 Hz to 85 MHz (Opt. B85, B85HD)

0.25 Hz to 125 MHz (Opt. B125, B125HD)

0.25 Hz to 165 MHz (Opt. B16x, B16xHD)

Minimum signal duration for 100% probability of trigger See minimum signal duration for 100% probability of trigger at 100% amplitude table Frequency edge trigger Range ±(½ × (ACQ BW or TDBW if TDBW is active)) Minimum event duration 6.2 ns (ACQ BW = 165 MHz, no TDBW, Opt. 16x) 6.2 ns (ACQ BW = 85 MHz, no TDBW, Opt. B85) 25 ns (ACQ BW = 40 MHz, no TDBW, Opt. B40) 25 ns (ACQ BW = 25 MHz, no TDBW, Opt. B25) Timing uncertaintySame as power trigger position timing uncertainty Runt trigger Runt definitions Positive, Negative Accuracy (for trigger levels >30 dB above noise floor, 10% to 90% of signal level) ±0.5 dB (level ≥ -50 dB from reference level) ±1.5 dB (from Time qualified triggering Trigger types and source Time qualification may be applied to: Level, Frequency mask, DPX Density, Runt, Frequency edge, Ext. 1, Ext. 2 Time qualification range T1: 0 to 10 seconds T2: 0 to 10 seconds Time qualification definitions Shorter than T1 Longer than T1 Longer than T1 AND shorter than T2 Shorter than T1 OR longer than T2 Holdoff trigger Range 0 to 10 seconds Acquisition relatedA/D converter 200 MS/s, 16 bit (Option B25, B40, B85, B16x); 400 MS/s, 14 bit (Option B85, B16x); 200 MS/s and 400 MS/s, 16 bit (Opt B85HD, B125HD, B16xHD) Acquisition memory size 1 GB (4 GB, opt. 53) Minimum acquisition length 64 samples Acquisition length setting resolution 1 sample Fast frame acquisition mode5Up to 1 Million records can be stored in a single acquisition (for pulse measurements and spectrogram analysis (with option 53)) Memory depth (time) and minimum time domain resolution Acq. BW (max span) Sample rate (for I and Q)

Record length (Std.) Record length (Opt. 53)

Time resolution 165 MHz 200 MS/s 1.34 s 5.37 s 5 ns 85 MHz 200 MS/s 1.34 s 5.37 s 5 ns 80 MHz 100 MS/s 2.68 s 10.74 s 10 ns 40 MHz 50 MS/s 4.77 s 19.09 s 20 ns 25 MHz 50 MS/s 4.77 s 19.09 s 20 ns 20 MHz 25 MS/s 4.77 s 38.18 s 20 ns 10 MHz 12.5 MS/s 19.09 s 76.35 s 80 ns 5 MHz 6.25 MS/s 38.18 s 152.71 s 160 ns 2 MHz 6 3.125 MS/s 42.9 s 171.8 s 320 ns 1 MHz 1.563 MS/s 85.9 s 343.6 s 640 ns 500 kHz 781.25 kS/s 171.8 s 687.2 s 1.28 μs 200 kHz 390.625 kS/s 343.6 s 1374.4 s 2.56 μs 100 kHz 195.313 kS/s 687.2 s 2748.8 s 5.12 μs 50 kHz 97.656 kS/s 1374.4 s 5497.6 s 10.24 μs 20 kHz 48.828 kS/s 2748.8 s 10955.1 s 20.48 μs 10 kHz 24.414 kS/s 5497.6 s 21990.2 s 40.96 μs 5 kHz 12.207 kS/s 10955.1 s 43980.5 s 81.92 μs 2 kHz 3.052 kS/s 43980.4 s 175921.8 s 328 μs 1 kHz 1.526 kS/s 87960.8 s 351843.6 s 655 μs 500 Hz 762.9 S/s 175921.7 s 703687.3 s 1.31 ms 200 Hz 381.5 S/s 351843.4 s 1407374.5 s 2.62 ms 100 Hz 190.7 S/s 703686.8 s 2814749.1 s 5.24 ms Displays and measurementsFrequency views Spectrum (amplitude vs linear or log frequency)

DPX® spectrum display (live RF color-graded spectrum)

Spectrogram (amplitude vs frequency over time)

Spurious (amplitude vs linear or log frequency)

Phase noise (phase noise and Jitter measurement) (Opt. 11)

Time and statistics views Amplitude vs time

Frequency vs time

Phase vs time

DPX amplitude vs time

DPX frequency vs time

DPX phase vs time

Amplitude modulation vs time

Frequency modulation vs time

RF IQ vs time

Time overview

CCDF

Peak-to-Average ratio

Settling time, frequency, and phase (Opt. 12) views Frequency settling vs time, Phase settling vs time Noise figure and gain (Opt. 14) views Noise figure vs. frequency

Gain vs. frequency

Noise figure, gain at a single frequency

Y-factor vs. frequency

Noise temperature vs. frequency

Uncertainty calculator

Results table of all measurements

Advanced Pulse Analysis Pulse results table

Pulse trace (selectable by pulse number)

Pulse statistics (trend of pulse results, FFT of time trend and histogram)

Cumulative Statistics, Cumulative Histogram and Pulse-Ogram

Digital demod (Opt. 21) views Constellation diagram

EVM vs time

Symbol table (binary or hexadecimal)

Magnitude and phase error versus time, and signal quality

Demodulated IQ vs time

Eye diagram

Trellis diagram

Frequency deviation vs time

Flexible OFDM analysis (Opt. 22) views Constellation, scalar measurement summary

EVM or power vs carrier

Symbol table (binary or hexadecimal)

Frequency offset analysis Signal analysis can be performed either at center frequency or the assigned measurement frequency up to the limits of the instrument's acquisition and measurement bandwidths. WLAN 802.11a/b/g/j/p measurement application (Opt. 23) WLAN Power vs time, WLAN symbol table, WLAN constellation, Spectrum emission mask

Error vector magnitude (EVM) vs symbol (or time), vs subcarrier (or frequency)

Mag error vs symbol (or time), vs subcarrier (or frequency)

Phase error vs symbol (or time), vs subcarrier (or frequency)

Channel frequency response vs symbol (or time), vs subcarrier (or frequency)

Spectral flatness vs symbol (or time), vs subcarrier (or frequency)

WLAN 802.11n measurement application (Opt. 24) WLAN Power vs time, WLAN symbol table, WLAN constellation, Spectrum emission mask

Error vector magnitude (EVM) vs symbol (or time), vs subcarrier (or frequency)

Mag error vs symbol (or time), vs subcarrier (or frequency)

Phase error vs symbol (or time), vs subcarrier (or frequency)

Channel frequency response vs symbol (or time), vs subcarrier (or frequency)

Spectral flatness vs symbol (or time), vs subcarrier (or frequency)

WLAN 802.11ac measurement application (Opt. 25) WLAN Power vs time, WLAN symbol table, WLAN constellation, Spectrum emission mask

Error vector magnitude (EVM) vs symbol (or time), vs subcarrier (or frequency)

Mag error vs symbol (or time), vs subcarrier (or frequency)

Phase error vs symbol (or time), vs subcarrier (or frequency)

Channel frequency response vs symbol (or time), vs subcarrier (or frequency)

Spectral flatness vs symbol (or time), vs subcarrier (or frequency)

APCO P25 measurement application (Opt. 26) RF output power, operating frequency accuracy, modulation emission spectrum,

unwanted emissions spurious, adjacent channel power ratio, frequency deviation,

modulation fidelity, frequency error, eye diagram, symbol table, symbol rate accuracy,

transmitter power and encoder attack time, transmitter throughput delay, frequency deviation vs. time,

power vs. time, transient frequency behavior, HCPM transmitter logical channel peak adjacent channel power ratio,

HCPM transmitter logical channel off slot power, HCPM transmitter logical channel power envelope,

HCPM transmitter logical channel time alignment, cross-correlated markers

Bluetooth Measurements (Opt. 27 and Opt. 31) Peak power, average power, adjacent channel power or inband emission mask,

-20dB bandwidth, frequency error, modulation characteristics including ΔF1avg (11110000),

ΔF2avg (10101010), ΔF2 > 115 kHz, ΔF2/ΔF1 ratio, frequency deviation vs. time with packet

and octet level measurement information, carrier frequency f0, frequency offset (Preamble

and Payload), max frequency offset, frequency drift f1-f0, max drift rate fn-f0

and fn-fn-5, center frequency offset table and frequency drift table, color-coded

symbol table, packet header decoding information, eye diagram, constellation diagram,

editable limits.

LTE Downlink RF measurements (Opt. 28) Adjacent Channel Leakage Ratio (ACLR), Spectrum Emission Mask (SEM), Channel Power, Occupied Bandwidth, Power vs Time is for uplink only displaying Transmitter OFF power for TDD signals and LTE constellation diagram for PSS, SSS with Cell ID, Group ID, Sector ID and Frequency Error. 5G NR Uplink/Downlink measurements (RSA5BUP Opt. 5GNR)Channel Power (CHP), Adjacent Channel Power (ACP), Power vs Time (PVT)2, Modulation Accuracy (including Error Vector Magnitude (EVM), Frequency Error, IQ Error), EVM vs. Symbol, Occupied Bandwidth (OBW), Spectral Emission Mask (SEM), Constellation Diagram, and summary table with scalar results.EMC pre-compliance and troubleshooting Opt. 32 EMC-EMI display, Pre-compliance Setup Wizard, Measure Ambient, Re-measure Spot, Report. Troubleshooting tools: Inspect, Harmonic Markers, Level Target, Compare Traces, Persistence display Bandwidth relatedResolution bandwidth Resolution bandwidth range (spectrum analysis) 0.1 Hz to 5 MHz (10 MHz with Opt. B85, 20 MHz with Opt. B16x) (1, 2, 3, 5 sequence, Auto-coupled), or user selected (arbitrary) Resolution bandwidth shape Approximately Gaussian, shape factor 4.1:1 (60:3 dB) ±3%, typical Resolution bandwidth accuracy ±0.5% (Auto-coupled RBW mode) Alternative resolution bandwidth types Kaiser window (RBW, Gaussian), –6 dB mil, CISPR, Blackman-Harris 4B window, Uniform (none) window, Flat-top (CW ampl.) window, Hanning window Video bandwidth Video bandwidth range 1 Hz to 10 MHz plus wide open RBW/VBW maximum 10,000:1 RBW/VBW minimum 1:1 plus wide open Resolution 5% of entered value Accuracy (typical) ±10% Time domain bandwidth (amplitude vs time display) Time domain bandwidth range At least 1/10 to 1/10,000 of acquisition bandwidth, 1 Hz minimum Time domain BW shape 20 MHz (60 MHz, Opt. B85/B16x), shape factor Time domain bandwidth accuracy ≤10 MHz, approximately Gaussian, shape factor 4.1:1 (60:3 dB), ±10% typical 1 Hz to 20 MHz, and (>20 MHz to 60 MHz Opt. B85/B16x), ±10%

Minimum settable spectrum analysis RBW vs. span Frequency span RBW >10 MHz 100 Hz >1.25 MHz to 10 MHz 10 Hz ≤1 MHz 1 Hz ≤100 kHz 0.1 Hz Spectrum displayTraces Three traces + 1 math waveform + 1 trace from spectrogram for spectrum display Detector Peak, –Peak, Average (VRMS), ±Peak, Sample, CISPR (Avg, Peak, Quasi-peak average (of logs)) Trace functions Normal, Average, Max hold, Min hold, Average (of logs) Spectrum trace length 801, 2401, 4001, 8001, 10401, 16001, 32001, 64001 points Sweep speed (typical-mean) RBW = auto, RF/IF optimization: minimize sweep time Opt. B25 2000 MHz/s Opt. B40 3300 MHz/s Opt. B85 8000 MHz/s (RSA5103B/RSA5106B) 6000 MHz/s (RSA5115B/RSA5126B) Opt. B16x 11000 MHz/s (RSA5103B/RSA5106B) 8000 MHz/s (RSA5115B/RSA5126B) Minimum FFT Length vs. Trace Length (Independent of Span and RBW) Trace length (points) Minimum FFT length 801 4001 1024 8192 2401 10401 4096 16384 DPX relatedDPX® digital phosphor spectrum processing Characteristic Performance Spectrum processing rate (RBW = auto, trace length 801) 390,625 per second Spectrum processing rate (RBW = auto, trace length 801) (Option 300 with Option 09) 3,125,000 per second for Span/RBW ratio ≤ 333

390,625 per second for Span/RBW ratio > 333 DPX bitmap resolution 201 × 801 DPX bitmap color dynamic range 233 levels Marker information Amplitude, frequency, and signal density on the DPX display Minimum signal duration for 100% probability of detection (Max-hold on) See minimum signal duration for 100% probability of trigger at 100% amplitude table Span Range (Continuous processing)

100 Hz to 25 MHz (Opt. B25)

(40 MHz with Opt. B40)

(85 MHz with Opt. B85, B85HD)

(125 MHz with Opt. B125, B125HD)

(165 MHz with Opt. B16x, B16xHD)

Span range (Swept) Up to instrument frequency range Dwell time per step 50 ms to 100 s Trace processing Color-graded bitmap, +Peak, –Peak, average Trace length 801, 2401, 4001, 10401 Resolution BW accuracy (Auto-Coupled) ±0.5% Resolution BW Range vs. Acquisition Bandwidth (DPX®) Acquisition bandwidth RBW (Min) RBW (Max) 165 MHz 25 kHz 20 MHz 85 MHz 12.9 kHz 10 MHz 40 MHz 6.06 kHz 10 MHz 25 MHz 3.79 kHz 3.8 MHz 20 MHz 3.04 kHz 3.04 MHz 10 MHz 1.52 kHz 1.52 MHz 5 MHz 758 Hz 760 kHz 2 MHz 303 Hz 304 kHz 1 MHz 152 Hz 152 kHz 500 kHz 75.8 Hz 76 kHz 200 kHz 30.3 Hz 30.4 kHz 100 kHz 15.2 Hz 15.2 kHz 50 kHz 7.58 Hz 7.6 kHz 20 kHz 3.03 Hz 3.04 kHz 10 kHz 1.52 Hz 1.52 kHz 5 kHz 758 Hz 760 Hz 2 kHz 0.303 Hz 304 Hz 1 kHz 0.152 Hz 152 Hz 500 Hz 0.1 Hz 76 Hz 200 Hz 0.1 Hz 30.4 Hz 100 Hz 0.1 Hz 15.2 Hz StabilityResidual FM p-p in 1 second (95% confidence, typical). Phase relatedPhase noise sidebands dBc/Hz at specified center frequency (CF)

CF = 10 MHz CF = 1 GHz CF = 2 GHz CF = 6 GHz CF = 10 GHz CF = 20 GHz Offset Typical Spec/Typical Typical Typical Typical Typical 1 kHz –128 –103/–107 –107 –104 –99 –95 10 kHz –134 –109/–113 –112 –108 –108 –106 100 kHz –134 –112/–117 –115 –114 –108 –106 1 MHz –135 –130/–139 –137 –135 –128 –125 6 MHz –140 –137/–146 –142 –147 –145 –140 10 MHz NA –137/–146 –142 –147 –147 –144 Integrated phase (RMS), typical Integrated from 1 kHz to 10 MHz. Measurement frequency Integrated phase, radians 1 GHz 1.01 × 10–32 GHz 1.23 × 10–36 GHz 1.51 × 10–310 GHz 2.51 × 10–320 GHz 3.27 × 10–3

Typical phase noise performance as measured by Opt. 11.

AmplitudeSpecifications excluding mismatch error

Measurement range Displayed average noise level to maximum measurable input Input attenuator range 0 dB to 55 dB, 5 dB step Maximum safe input level Average continuous +30 dBm (RF ATT ≥10 dB, preamp off) Average continuous +20 dBm (RF ATT ≥10 dB, preamp on) Pulsed RF 50 W (RF ATT ≥30 dB, PW Maximum measurable input level Average continuous +30 dBm (RF ATT: Auto) Pulsed RF 10 W (RF Input, RF ATT: Auto, PW Max DC voltage ±5 V Log display range 0.01 dBm/div to 20 dB/div Display divisions 10 divisions Display units dBm, dBmV, Watts, Volts, Amps, dBuW, dBuV, dBuA, dBW, dBV, dBV/m, and dBA/m Marker readout resolution, dB units 0.01 dB Marker readout resolution, Volts units Reference-level dependent, as small as 0.001 μV Reference level setting range 0.1 dB step, –170 dBm to +50 dBm (minimum ref. level –50 dBm at center frequency Level linearity ±0.1 dB (0 to –70 dB from reference level) Amplitude accuracyAbsolute amplitude accuracy at calibration point ±0.31 dB (100 MHz, –10 dBm signal, 10 dB ATT, 18 °C to 28 °C) Input attenuator switching uncertainty ±0.3 dB (RSA5103B/RSA5106B) ±0.15 dB (RSA5115B/RSA5126B) Absolute amplitude accuracy at center frequency, 95% confidence710 MHz to 3 GHz ±0.3 dB 3 GHz to 6.2 GHz (RSA5106B/15B/26B) ±0.5 dB 6.2 GHz to 15 GHz (RSA5115B/26B) ±0.75 dB 15 GHz to 26.5 GHz (RSA5126B) ±0.9 dB VSWR Typical RSA5103B / RSA5106B 8Frequency range Preamp OFF (95% confidence) Preamp ON (Typical) Preamp ON, 0 dB attenuation (Typical) >10 kHz to 10 MHz -- -- >10 MHz to 2.0 GHz >2 GHz to 3 GHz >3 GHz to 5 GHz >5 GHz to 5.5 GHz >5.5 GHz to 6.2 GHz Typical RSA5115B / RSA5126B8Frequency range Preamp OFF (95% confidence) Preamp ON (Typical) Preamp ON, 0 dB attenuation (Typical) >10 kHz to 10 MHz -- -- 10 MHz to 3.0 GHz >3.0 GHz to 6.2 GHz >6.2 GHz to 11 GHz >11 GHz to 15 GHz >15 GHz to 22 GHz >22 GHz to 25 GHz >25 GHz to 26.5 GHz Frequency response18 °C to 28 °C, atten. = 10 dB, preamp off 10 MHz to 32 MHz (LF band) ±0.2 dB 10 MHz to 3 GHz ±0.35 dB >3 GHz to 6.2 GHz (RSA5106B) ±0.5 dB >6.2 GHz to 15 GHz (RSA5115B) ±1.0 dB >15 GHz to 26.5 GHz (RSA5115B) ±1.2 dB 5 °C to 40 °C, all attenuator settings (typical, preamp off) 100 Hz to 32 MHz (LF band) ±0.8 dB 9 kHz to 3 GHz ±0.5 dB 1 MHz to 3 GHz (RSA5115B/26B) ±0.5 dB >3 GHz to 6.2 GHz (RSA5106B) ±1.0 dB >6.2 GHz to 15 GHz (RSA5115B/26B) ±1.0 dB >15 GHz to 26.5 GHz (RSA5126B) ±1.5 dB 5 °C to 40 °C, (RSA5103B/RSA5106B Opt. 50) (typical, preamp on, atten.=10 dB) 1 MHz to 32 MHz (LF band) ±0.8 dB 1 MHz to 3 GHz ±0.8 dB >3 GHz to 6.2 GHz (RSA5106B) ±1.3 dB 5 °C to 40 °C, (RSA5115B / RSA5126B Opt. 51) (typical, preamp on, atten.=10 dB)1 MHz to 3 GHz ±0.8 dB >3 GHz to 6.2 GHz ±1.3 dB >6.2 GHz to 15 GHz ±1.5 dB >15 GHz to 26.5 GHz (RSA5126B) ±2.0 dB Noise and distortion3rd order intermodulation distortion at 2.13 GHz 9RSA5103B / RSA5106B –84 dBc RSA5115B / RSA5126B –80 dBc 3rd order intermodulation distortion – typical9Note: 3rd order intercept point is calculated from 3rd order intermodulation performance. Frequency range 3rd order intermodulation distortion, dBc (typical) 3rd order intercept, dBm (typical) RSA5103B/5106B RSA5115B/5126B RSA5103B/5106B RSA5115B/5126B 10 kHz to 32 MHz (LF band)

–75 –75 +12.5 +12.5 1 MHz to 120 MHz –70 –70 +10 +10 >80 MHz to 300 MHz –76 –76 +13 +13 >300 MHz to 6.2 GHz –84 –82 +17 +16 >6.2 GHz to 15 GHz -- –72 -- +11 15 GHz to 26.5 GHz -- –72 -- +11 3rd order intermodulation distortion (preamp ON) – typical9Note: 3rd order intercept point is calculated from 3rd order intermodulation performance. Frequency range 3rd order intermodulation distortion, dBc (typical) 3rd order intercept, dBm (typical) RSA5103B/5106B RSA5115B/5126B RSA5103B/5106B RSA5115B/5126B 1 MHz to 32 MHz (LF band)

-75 -75 -12.5 -12.5 1 MHz to 120 MHz -70 -80 -15 -10 >120 MHz to 300 MHz -75 -80 -12.5 -10 >300 MHz to 3.0 GHz -80 -90 -10 -5 >3.0 GHz to 6.2 GHz -90 -90 -5 -5 >6.2 GHz to 15 GHz -- -80 -- -10 >15 GHz to 126.5 GHz -- -80 -- -10 RSA5103B / RSA5106B 2nd harmonic distortion1010 MHz to 1 GHz >1 GHz to 3.1 GHz RSA5115B / RSA5126B 2nd harmonic distortion1010 MHz to 500 MHz >500 MHz to 1 GHz >1 GHz to 3.1 GHz >3.1 GHz to 7.5 GHz >7.5 GHz to 13.25 GHz RSA5103B / RSA5106B displayed average noise level11, preamp off Frequency range Spec, dBm/Hz Typical , dBm/Hz LF Band (all models) 1 Hz to 100 Hz -- –129 >100 Hz to 2 kHz –124 –143 >2 kHz to 10 kHz –141 –152 >10 kHz to 32 MHz –150 –153 RF band 9 kHz to 1 MHz –108 –111 >1 MHz to 10 MHz –136 –139 >10 MHz to 2 GHz –153 –157 >2 GHz to 3 GHz –152 –156 >3 GHz to 4 GHz (RSA5106B) –151 –155 >4 GHz to 6.2 GHz (RSA5106B) –149 –153 RSA5115B / RSA5126B displayed average noise level, preamp off11Frequency range Spec, dBm/Hz Typical , dBm/Hz LF Band (all models) 1 Hz to 100 Hz –129 >100 Hz to 2 kHz –124 –143 >2 kHz to 10 kHz –141 –152 >10 kHz to 32 MHz –150 –153 RF band >1 MHz to 10 MHz –136 –139 >10 MHz to 3 GHz –152 –155 >3 GHz to 4 GHz –151 –155 >4 GHz to 6.2 GHz –149 –152 >6.2 GHz to 13 GHz –146 –149 >13 GHz to 23 GHz –144 –147 >23 GHz to 26.5 GHz (RSA5126B) –140 –143 Preamplifier performance (Opt. 50) Frequency range 1 MHz to 3.0 GHz or 6.2 GHz (RSA5106B) Noise figure at 2 GHz 7 dB Gain at 2 GHz 20 dB (nominal) Preamplifier performance (Opt. 51) Frequency range 1 MHz to 15 GHz or 26.5 GHz (RSA5115B or RSA5126B) Noise figure at 15 GHz Noise figure at 26.5 GHz Gain at 10 GHz 20 dB (nominal) Displayed Average Noise Level11, preamp on (Opt. 50) Frequency range Specification Typical LF band 1 MHz to 32 MHz –158 dBm/Hz –160 dBm/Hz RF band 1 MHz to 10 MHz –158 dBm/Hz –160 dBm/Hz >10 MHz to 2 GHz –164 dBm/Hz –167 dBm/Hz >2 GHz to 3 GHz –163 dBm/Hz –165 dBm/Hz >3 GHz to 6.2 GHz (RSA5106B) –162 dBm/Hz –164 dBm/Hz Displayed average noise level11, preamp on (Opt. 51) Frequency range Specification Typical RF band 1 MHz to 10 MHz –158 dBm/Hz –160 dBm/Hz >10 MHz to 2 GHz –164 dBm/Hz –167 dBm/Hz >2 GHz to 3 GHz –163 dBm/Hz –165 dBm/Hz >3 GHz to 4 GHz –160 dBm/Hz –163 dBm/Hz >4 GHz to 6.2 GHz –159 dBm/Hz –162 dBm/Hz >6.2 GHz to 13 GHz –159 dBm/Hz –162 dBm/Hz >13 GHz to 23 GHz –157 dBm/Hz –160 dBm/Hz >23 GHz to 26.5 GHz –153 dBm/Hz –156 dBm/Hz Residual response Input terminated, RBW = 1 kHz, attenuator = 0 dB, reference level –30 dBm 500 kHz to 32 MHz, LF band 1 MHz to 80 MHz, RF band >80 MHz to 200 MHz >200 MHz to 3 GHz –95 dBm >3 GHz to 6.2 GHz (RSA5106B / RSA5115B / RSA5126B) –95 dBm >6.2 GHz to 15 GHz (RSA5115B / RSA5126B) –95 dBm >15 GHz to 26.5 GHz (RSA5126B) –95 dBm Image response, up to 165 MHz bandwidth Ref = –30 dBm, attenuator = 10 dB, RF input level = –30 dBm, RBW = 10 Hz. 100 Hz to 30 MHz 30 MHz to 3 GHz >3 GHz to 6.2 GHz (RSA5106B) >6.2 GHz to 15 GHz (RSA5115B / RSA5126B) >15 GHz to 26.5 GHz (RSA5126B) Spurious response with signal at CF, offset ≥400 kHz12Span ≤25 MHz (Opt. B25) Span ≤40 MHz (Opt. B40) 13Opt. B85/B125/B16x13Opt. B85HD, B125HD, B16xHD13Swept spans >25 MHz Swept spans >40 MHz 40 MHz 40 MHz Frequency Specification Typical Specification Typical Specification Typical Typical 10 kHz to 32 MHz (LF band) –80 dBc –85 dBc -- -- -- -- -- 30 MHz to 3 GHz –73 dBc –80 dBc –73 dBc –80 dBc –73 dBc –75 dBc –80 dBc >3 GHz to 6.2 GHz (RSA5106B / RSA5115B / RSA5126B) –73 dBc –80 dBc –73 dBc –80 dBc –73 dBc –75 dBc –80 dBc 6.2 GHz to 15 GHz (RSA5115B / RSA5126B) –70 dBc –80 dBc –70 dBc –80 dBc –70 dBc –73 dBc –80 dBc 15 GHz to 26.5 GHz (RSA5126B) –66 dBc –76 dBc –66 dBc –76 dBc –66 dBc –73 dBc –76 dBc Spurious response with signal at CF (10 kHz ≤ offset 12Frequency Typical 10 kHz to 32 MHz (LF band) –75 dBc 30 MHz to 3 GHz –75 dBc 3 GHz to 6.2 GHz (RSA5106B) –75 dBc 6.2 GHz to 15 GHz (RSA5115B / RSA5126B) –75 dBc 15 GHz to 26.5 GHz (RSA5126B) –68 dBc Spurious response with signal at Half-IF (3.532.75 GHz) Spurious response with signal, other than CF (typical) Frequency Span ≤25MHz, swept spans >25MHz Opt. B40, Span ≤40MHz, swept spans >40 MHz 14Opt. B85, 40MHz 14Opt. B16x, 85MHz 14,15Opt. B85HD, B125HD, B16xHD, 40 MHz 141 MHz - 32 MHz (LF Band) –80 dBc -- -- -- -- 30 MHz - 3 GHz –80 dBc –80 dBc –76 dBc –73 dBc -80 dBc 3 GHz - 6.2 GHz (RSA5106B) –80 dBc –80 dBc –76 dBc –73 dBc -80 dBc 6.2 GHz - 15 GHz (RSA5115B) –80 dBc –80 dBc –73 dBc –73 dBc -80 dBc 15 GHz - 26.5 GHz (RSA5126B) –76 dBc –76 dBc –73 dBc –73 dBc -76 dBc Local oscillator feed-through to input connector (attenuator = 10 dB) Adjacent channel leakage ratio dynamic range Measured with test signal amplitude adjusted for optimum performance (CF = 2.13 GHz) ACLR, typical Signal type, measurement mode Adjacent Alternate 3GPP downlink, 1 DPCH Uncorrected –69 dB –70 dB Noise corrected –75 dB –77 dB IF frequency response and phase linearity, includes all preselection and image rejection filters16Measurement frequency (GHz) Acquisition bandwidth Amplitude flatness (Spec) Amplitude flatness (Typ, RMS)

Phase linearity (Typ, RMS)

0.001 to 0.032 (LF band) ≤20 MHz ±0.4 dB 0.3 dB 0.5° Opt. B250.01 to 6.2 17≤300 kHz ±0.1 dB 0.05 dB 0.1° 0.03 to 6.2 ≤25 MHz ±0.3 dB 0.2 dB 0.5° Opt. B40 0.03 to 6.2 ≤40 MHz ±0.3 dB 0.2 dB 0.5° Opt. B85/B85HD0.07 to 3.0 ≤85 MHz ±0.5 dB 0.3 dB 1.5° >3.0 to 6.2 ≤85 MHz ±0.5 dB 0.4 dB 1.5° Opt. B125/B125HD0.07 to 6.2 ≤125 MHz ±1.0 dB 0.70 dB 1.5° Opt. B16x/B16xHD0.07 to 6.2 ≤165 MHz ±0.5 dB 0.4 dB 1.5° RSA5115B / RSA5126B IF frequency response and phase linearity Includes all preselection and image rejection filters 16Measurement frequency (GHz) Span Amplitude flatness (Spec) Amplitude flatness (Typ, RMS)

Phase linearity (Typ, RMS)

6.2 to 26.5 ≤300 kHz ±0.10 dB170.05 dB 0.2° 6.2 to 26.5 ≤25/40 MHz ±0.50 dB 0.40 dB 1.0° 6.2 to 26.5 ≤80 MHz ±0.75 dB 0.70 dB 1.5° 6.2 to 26.5 ≤125 MHz ±1.0 dB 0.70 dB 1.5° 6.2 to 26.5 ≤165 MHz ±1.0 dB 0.70 dB 1.5° DPX zero-span performanceZero-span amplitude, frequency, phase performance (nominal) Measurement BW range 100 Hz to maximum acquisition bandwidth of instrument Time domain BW (TDBW) range At least 1/10 to 1/10,000 of acquisition bandwidth, 1 Hz minimum Time domain BW (TDBW) accuracy ±1% Sweep time range 100 ns (minimum)

2000 s (maximum, Measurement BW >80 MHz)

Time accuracy ±(0.5% + Reference frequency accuracy) Zero-span trigger timing uncertainty (Power trigger) ±(Zero-span sweep time/400) at trigger point DPX frequency display range ±100 MHz maximum DPX phase display range ±200 degrees maximum DPX waveforms/s 50,000 triggered waveforms/s for sweep time ≤20 μs DPX spectrogram trace detection +Peak, –Peak, Avg (VRMS) DPX spectrogram trace length 801 to 10401 DPX spectrogram memory depth Trace length = 801: 60,000 traces Trace length = 2401: 20,000 traces Trace length = 4001: 12,000 traces Trace length = 10401: 4,600 traces Time resolution per line User settable 125 µs to 6400 s Maximum recording time vs line resolution 7.5 seconds (801 points/trace, 125 μs/line) to 4444 days (801 points/trace, 6400 s/line) Digital IQ Output (Opt. 65)Connector type MDR (3M) 50 pin × 2 Data output Data is corrected for amplitude and phase response in real time Data format I data: 16 bit LVDS Q data: 16 bit LVDS Control output Clock: LVDS, Max 50 MHz (200 MHz, Opt. B85, B16x) DV (Data valid), MSW (Most significant word) indicators, LVDS Control input IQ data output enabled, connecting GND enables output of IQ data Clock rising edge to data transition time (Hold time) 8.4 ns (typical, Opt. B25 or B40), 1.58 ns (typical, Opt. B85 or B16x) Data transition to clock rising edge (Setup time) 8.2 ns (typical, Opt. B25 or B40), 1.54 ns (typical, Opt. B85 or Opt. B16x) Zero-span analog output (Opt. 66)General information Option 66 provides for a real-time analog representation of the detected output of the analyzer. This output is available when either the DPX spectrum or DPX zero span function is used in spans up to the maximum acquisition bandwidth. The bandwidth of the analog output is adjustable using the resolution bandwidth control of the DPX spectrum analyzer, or can be made independent of the spectrum analyzer. The output is "OFF" when the instrument is in swept spectrum analyzer mode, as it does not correspond to the output of the swept output Connector type BNC - Female Output impedance On: 50 Ω, Off: 5 kΩ Output voltage Typical 1.0V @ 0 dBm input 0 dBm reference level, 10 dB/div vertical scale, measured into a 50 Ω load. Full-scale voltage is relative to reference level. Maximum 1.25 V Accuracy ± 5% of full-scale voltage Slope 10 mV/dB 10 dB/div vertical scale, measured into a 50 Ω load. Slope will vary with vertical scale setting. Output range log fidelity > 60 dB @ 1 GHz CF Output log accuracy ± 0.75 dB within range Output delay accuracy RF Input to Analog Out ± (1 μs + 10%) Output bandwidth Up to maximum RBW Continuous output Continuous output for spans up to the maximum real-time acquisition bandwidth of the instrument. Output is disabled for swept spans. Output reverse power protection ±20 V AM/FM/PM and direct audio measurement (Opt. 10)Analog demodulation Carrier frequency range (for modulation and audio measurements) (1/2 × audio analysis bandwidth) to maximum input frequency Maximum audio frequency span 10 MHz Audio filters Low pass (kHz) 0.3, 3, 15, 30, 80, 300, and user-entered up to 0.9 × audio bandwidth High pass (Hz) 20, 50, 300, 400, and user-entered up to 0.9 × audio bandwidth Standard CCITT, C-Message De-emphasis (μs) 25, 50, 75, 750, and user-entered File User-supplied .TXT or .CSV file of amplitude/frequency pairs. Maximum 1000 pairs FM Modulation Analysis (Modulation Index >0.1) FM measurements Carrier Power, Carrier Frequency Error, Audio Frequency, Deviation (+Peak, -Peak, Peak-Peak/2, RMS), SINAD, Modulation Distortion, S/N, Total Harmonic Distortion, Total Non-harmonic Distortion, Hum and Noise Carrier power accuracy (10 MHz to 2 GHz, -20 to 0 dBm input power) ±0.85 dB Carrier frequency accuracy (deviation: 1 to 10 kHz) ±0.5 Hz + (transmitter frequency × reference frequency error) FM deviation accuracy (rate: 1 kHz to 1 MHz) ±(1% of (rate + deviation) + 50 Hz) FM rate accuracy (deviation: 1 to 100 kHz) ±0.2 Hz Residuals (FM) (rate: 1 to 10 kHz, deviation: 5 kHz) THD 0.10% Distortion 0.7% SINAD 43 dB AM modulation analysis AM measurements Carrier Power, Audio Frequency, Modulation Depth (+Peak, –Peak, Peak-Peak/2, RMS), SINAD, Modulation Distortion, S/N, Total Harmonic Distortion, Total Non-harmonic Distortion, Hum and Noise Carrier power accuracy (10 MHz to 2 GHz, –20 to 0 dBm input power) ±0.85 dB AM depth accuracy (rate: 1 to 100 kHz, depth: 10% to 90%) ±0.2% + 0.01 × measured value AM rate accuracy (rate: 1 kHz to 1 MHz, depth: 50%) ±0.2 Hz Residuals (AM) THD 0.16% Distortion 0.13% SINAD 58 dB PM modulation analysis PM measurements Carrier Power, Carrier Frequency Error, Audio Frequency, Deviation (+Peak, -Peak, Peak-Peak/2, RMS), SINAD, Modulation Distortion, S/N, Total Harmonic Distortion, Total Non-harmonic Distortion, Hum and Noise Carrier power accuracy (10 MHz to 2 GHz, -20 to 0 dBm input power) ±0.85 dB Carrier frequency accuracy (deviation: 0.628 rad) ±0.02 Hz + (transmitter frequency × reference frequency error) PM deviation accuracy (rate: 10 to 20 kHz, deviation: 0.628 to 6 rad) ±100% × (0.005 + (rate / 1 MHz)) PM rate accuracy (rate: 1 to 10 kHz, deviation: 0.628 rad) ±0.2 Hz Residuals (PM) (rate: 1 to 10 kHz, deviation: 0.628 rad) THD 0.1% Distortion 1% SINAD 40 dB Direct audio input Audio measurements Signal power, Audio frequency (+Peak, –Peak, Peak-Peak/2, RMS), SINAD, Modulation distortion, S/N, Total harmonic distortion, Total non-harmonic distortion, Hum and Noise Direct input frequency range (for audio measurements only) 1 Hz to 156 kHz Maximum audio frequency span 156 kHz Audio frequency accuracy ±0.2 Hz Signal power accuracy ±1.5 dB Residuals (Rate: 1 to 10 kHz, Input level: 0.316 V) THD 0.1% Distortion 0.1% SINAD 60 dB Phase noise and jitter measurement (Opt. 11)Carrier frequency range 1 MHz to maximum instrument frequency Measurements Carrier power, Frequency error, RMS phase noise, Jitter (time interval error), Residual FM Residual Phase Noise See Phase noise specifications Phase noise and jitter integration bandwidth range Minimum offset from carrier: 10 Hz Maximum offset from carrier: 1 GHz Number of traces 2 Trace and measurement functions Detection: average or ±Peak Smoothing Averaging Optimization: speed or dynamic range Settling time, frequency, and phase (Opt. 12)18Settled frequency uncertainty 95% confidence (typical), at stated measurement frequencies, bandwidths, and # of averages Frequency uncertainty at stated measurement bandwidth Measurement frequency, averages 85 MHz 10 MHz 1 MHz 100 kHz 1 GHz Single measurement 2 kHz 100 Hz 10 Hz 1 Hz 100 averages 200 Hz 10 Hz 1 Hz 0.1 Hz 1000 averages 50 Hz 2 Hz 1 Hz 0.05 Hz 10 GHz Single measurement 5 kHz 100 Hz 10 Hz 5 Hz 100 averages 300 Hz 10 Hz 1 Hz 0.5 Hz 1000 averages 100 Hz 5 Hz 0.5 Hz 0.1 Hz 20 GHz Single measurement 2 kHz 100 Hz 10 Hz 5 Hz 100 averages 200 Hz 10 Hz 1 Hz 0.5 Hz 1000 averages 100 Hz 5 Hz 0.5 Hz 0.2 Hz Settled phase uncertainty 95% confidence (Typical), at stated measurement frequencies, bandwidths, and # of averages Frequency uncertainty at stated measurement bandwidth Measurement frequency, averages 85 MHz 10 MHz 1 MHz 1 GHz Single measurement 1.00° 0.50° 0.50° 100 averages 0.10° 0.05° 0.05° 1000 averages 0.05° 0.01° 0.01° 10 GHz Single measurement 1.50° 1.00° 0.50° 100 averages 0.20° 0.10° 0.05° 1000 averages 0.10° 0.05° 0.02° 20 GHz Single measurement 1.00° 0.50° 0.50° 100 averages 0.10° 0.05° 0.05° 1000 averages 0.05° 0.02° 0.02° Gain and Noise Figure (Option 14)Measurements (tabular) Noise Figure, Gain, Y-Factor, Noise Temperature, P-Hot, P-Cold Measurements (displays) Noise Figure, Gain, Y-Factor, Noise Temperature, Uncertainty Calculator Single frequency measurements When Single Frequency mode is selected, each display acts as a meter and single-value readout for each selected trace in the measurement Measurement configurations Direct, Up-Converter, Down-Converter Frequency modes Single Frequency, Swept (Center+Span or Start-Stop), Frequency Table; 1 to 999 measurement points Noise source Constant ENR or tabular entry; entry fields for noise source model and type Noise sources supported NoiseCom NC346 series and similar models from other manufacturers Noise source control +28 V switched output, rear panel External gain/loss tables 3 tables or constants available for gain or loss Measurement control settings Source settling time, reference temperature, RBW(50 Hz to 10 MHz), Average count(1 to 100) Instrument input control settings Attenuator value, Preamp On/Off Trace controls 3 traces per display: Ave(VRMS), Max-hold, Min-hold trace functions Display scaling Auto or manual: Auto resets scale after each measurement Markers Up to 5 markers on any trace; Absolute and Delta marker functions Limit mask testing Positive and negative limits may be applied to noise figure, gain, Y-factor traces; limits and Pass/Fail indicated on screen Uncertainty calculator Provides noise figure and gain measurement uncertainty based on user-entered values for ENR, external preamp, external preamp, and spectrum analyzer parameters Application preset for Noise Figure and Gain Sets the analyzer to measure Gain, Noise Figure, and the Measurement Table. Sets attenuation to zero, preamplifier ON, and acquisition mode to best for minimum noise Performance Specification Description Frequency range 10 MHz to maximum frequency of instrument (nominal) Noise figure measurement range 0 to 30 dB (nominal) Gain measurement range -10 to 30 dB (nominal) Noise figure and gain measurement resolution 0.01 dB (nominal) Noise figure measurement error ±0.1 dB (typical) 19Gain measurement error ±0.1 dB (typical) 19Note: These conditions for Noise Figure and Gain specifications apply: Operating temperature 18 to 28 deg. C, after 20 minute warmup with internal preamp ON, immediately after internal alignment. Specified error includes only the error of the spectrum analyzer. Uncertainty from errors in ENR source level, external amplifier gain, low SN ratio and measurement system mismatch are not included, and can all be estimated using the uncertainty calculator included in the software.

Pulse measurements (Opt. 20)Measurements Average on power, Peak power, Average transmitted power, Pulse width, Rise time, Fall time, Repetition interval (seconds), Repetition rate (Hz), Duty factor (%), Duty factor (ratio), Ripple (dB), Ripple (%), Droop (dB), Droop (%), Overshoot (dB), Overshoot (%), Pulse frequency, Delta frequency, Pulse-Ref Pulse frequency difference, Pulse-Ref Pulse Phase difference, Pulse-Pulse frequency difference, Pulse-Pulse phase difference, RMS frequency error, Max frequency error, RMS phase error, Max phase error, Frequency deviation, Phase deviation, Impulse response (dB), Impulse response (time), Time stamp Minimum pulse width for detection 150 ns (Opt. B25/B40), 50 ns (Opt. B85/B16x) Number of pulses20 1 to 200,000; offline analysis of more than 40,000 continuous pulses is recommended using fast frame mode and fast save option System rise time (typical) Pulse measurement accuracy Signal conditions: Unless otherwise stated, Pulse width >450 ns (150 ns, Opt. B85/B16x), S/N Ratio ≥30 dB, Duty cycle 0.5 to 0.001, Temperature 18 °C to 28 °C Impulse response Measurement range: 15 to 40 dB across the width of the chirp

Measurement accuracy (typical): ±2 dB for a signal 40 dB in amplitude and delayed 1% to 40% of the pulse chirp width 21

Impulse response weighting Taylor window Pulse measurement performancePulse amplitude and timing (typical) Average on power22±0.3 dB + Absolute amplitude accuracy Average transmitted power22±0.4 dB + Absolute amplitude accuracy Peak power22±0.4 dB + Absolute amplitude accuracy Pulse width ±0.25% of reading Duty factor ±0.2% of reading Frequency and phase error referenced to nonchirped signal At stated frequencies and measurement bandwidths 23, typical, 95% confidence Bandwidth CF RMS frequency error Pulse to pulse frequency Pulse to pulse delta frequency Pulse to pulse phase 25 MHz 2 GHz ±2.5 kHz ±15 kHz ±500 Hz ±0.2° 10 GHz ±2.5 kHz ±20 kHz ±1.5 kHz ±0.5° 20 GHz ±3.5 kHz ±25 kHz ±2 kHz ±0.8° 40 MHz 2 GHz ±3.5 kHz ±20 kHz ±1 kHz ±0.2° 10 GHz ±5 kHz ±30 kHz ±2 kHz ±0.5° 20 GHz ±7.5 kHz ±40 kHz ±3 kHz ±0.8° 60 MHz 2 GHz ±8 kHz ±50 kHz ±1.5 kHz ±0.3° 10 GHz ±15 kHz ±75 kHz ±3 kHz ±0.5° 20 GHz ±20 kHz ±100 kHz ±4 kHz ±0.8° 85 MHz 2 GHz ±15 kHz ±100 kHz ±2 kHz ±0.3° 10 GHz ±20 kHz ±125 kHz ±3 kHz ±0.5° 20 GHz ±25 kHz ±175 kHz ±4 kHz ±0.8° 160 MHz 2 GHz ±20 kHz ±100 kHz ±4.5 kHz ±0.3° 10 GHz ±25 kHz ±125 kHz ±6 kHz ±0.5° 20 GHz ±40 kHz ±175 kHz ±8 kHz ±0.8° Frequency and phase error referenced to a linear chirp At stated frequencies and measurement bandwidths 24, typical Bandwidth CF RMS frequency error Pulse to pulse frequency Pulse to pulse phase 25 MHz 2 GHz ±5 kHz ±15 kHz ±0.25° 10 GHz ±8 kHz ±20 kHz ±0.5° 20 GHz ±10 kHz ±25 kHz ±0.8° 40 MHz 2 GHz ±5 kHz ±20 kHz ±0.25° 10 GHz ±8 kHz ±30 kHz ±0.5° 20 GHz ±10 kHz ±50 kHz ±0.8° 60 MHz 2 GHz ±25 kHz ±125 kHz ±0.3° 10 GHz ±30 kHz ±150 kHz ±0.5° 20 GHz ±30 kHz ±150 kHz ±0.8° 85 MHz 2 GHz ±25 kHz ±125 kHz ±0.3° 10 GHz ±30 kHz ±150 kHz ±0.5° 20 GHz ±30 kHz ±175 kHz ±0.8° 160 MHz 2 GHz ±35 kHz ±125 kHz ±0.3° 10 GHz ±40 kHz ±150 kHz ±0.5° 20 GHz ±40 kHz ±200 kHz ±0.8° Digital modulation analysis (Opt. 21)Modulation formats π/2DBPSK, BPSK, SBPSK, QPSK, DQPSK, π/4DQPSK, D8PSK, D16PSK, 8PSK, OQPSK, SOQPSK, CPM, 16/32-APSK, 16/32/64/128/256QAM, MSK, GMSK, 2-FSK, 4-FSK, 8-FSK, 16-FSK, C4FM Analysis period Up to 81,000 samples Filter types Measurement filters Square-root raised cosine, Raised cosine, Gaussian, Rectangular, IS-95, IS-95 EQ, C4FM-P25, Half-sine, None, User defined Reference filters Raised cosine, Gaussian, Rectangular, IS-95, SBPSK-MIL, SOQPSK-MIL, SOQPSK-ARTM, none, user defined Alpha/B*T range 0.001 to 1, 0.001 step Measurements Constellation, Error Vector Magnitude (EVM) vs. Time, Modulation error ratio (MER), Magnitude error vs. Time, Phase error vs. Time, Signal quality, Symbol table, Rho FSK only: Frequency deviation, Symbol timing error Symbol rate range 1 kS/s to 100 MS/s (modulated signal must be contained entirely within acquisition BW of the instrument) QPSK residual EVM25100 kHz symbol rate 1 MHz symbol rate 10 MHz symbol rate 30 MHz symbol rate (Opt. B40/B85/B16x) 60 MHz symbol rate (Opt. B85/B16x) 120 MHz symbol rate (Opt. B16x) Offset QPSK residual EVM25 100 kHz symbol rate, 200 kHz measurement BW 1 MHz symbol rate, 2 MHz measurement BW 10 MHz symbol rate, 20 MHz measurement BW 256 QAM residual EVM2610 MHz symbol rate 30 MHz symbol rate (Opt. B40/B85/B16x) 60 MHz symbol rate (Opt. B85/B16x) 120 MHz symbol rate (Opt. B16x) S-OQPSK (MIL) residual EVM274 kHz symbol rate, 64 kHz measurement bandwidth, CF = 250 MHz 20 kHz symbol rate, 320 kHz measurement bandwidth, CF = 2 GHz 100 kHz symbol rate, 1.6 MHz measurement bandwidth, CF = 2 GHz 1 MHz symbol rate, 16 MHz measurement bandwidth, CF = 2 GHz S-OQPSK (ARTM) residual EVM274 kHz symbol rate, 64 kHz measurement bandwidth, CF = 250 MHz 20 kHz symbol rate, 320 kHz measurement bandwidth, CF = 2 GHz 100 kHz symbol rate, 1.6 MHz measurement bandwidth, CF = 2 GHz 1 MHz symbol rate, 16 MHz measurement bandwidth, CF = 2 GHz S-BPSK (MIL) residual EVM284 kHz symbol rate, 64 kHz measurement bandwidth, CF = 250 MHz 20 kHz symbol rate, 320 kHz measurement bandwidth, CF = 2 GHz 100 kHz symbol rate, 1.6 MHz measurement bandwidth, CF = 2 GHz 1 MHz symbol rate, 1.6 MHz measurement bandwidth, CF = 2 GHz CPM (MIL) residual EVM284 kHz symbol rate, 64 kHz measurement bandwidth, CF = 250 MHz 20 kHz symbol rate, 320 kHz measurement bandwidth, CF = 2 GHz 100 kHz symbol rate, 1.6 MHz measurement bandwidth, CF = 2 GHz 1 MHz symbol rate, 16 MHz measurement bandwidth, CF = 2 GHz 2/4/8/16 FSK residual RMS FSK error292FSK, 10 kHz symbol rate, 10 kHz frequency deviation, CF = 2 GHz 4/8/16FSK, 10 kHz symbol rate, 10 kHz frequency deviation, CF = 2 GHz Adaptive equalizerType Linear, decision-directed, feed-forward (FIR) equalizer with co-efficient adaptation and adjustable convergence rate Modulation types supported BPSK, QPSK, OQPSK, π/2DBPSK, π/4DQPSK, 8PSK, 8DPSK, 16DPSK, 16/32/64/128/256QAM Reference filters for all modulation types except OQPSK Raised cosine, rectangular, none Reference filters for OQPSK Raised cosine, half sine Filter length 3 to 2001 taps Taps/Symbol: raised cosine, half sine 1, 2, 4, 8 Taps/Symbol: rectangular filter, no filter 1 Equalizer controls Off, train, hold, reset Flexible OFDM (Opt. 22)Recallable standards WiMAX 802.16-2004, WLAN 802.11 a/g/j Parameter settings Guard interval, subcarrier spacing, channel bandwidth Advanced parameter settings Carrier detect: 802.11, 802.16-2004 - Auto-detect; Manual select BPSK; QPSK, 16QAM, 64QAM

Channel estimation: Preamble, Preamble + Data

Pilot tracking: Phase, Amplitude, Timing

Frequency correction: On, Off

Summary measurements Symbol clock error, Frequency error, Average power, Peak-to-Average, CPE

EVM (RMS and peak) for all carriers, plot carriers, data carriers

OFDM parameters: Number of carriers, Guard interval (%), Subcarrier spacing (Hz), FFT Length

Power (Average, Peak-to-Average)

Displays EVM vs symbol, vs subcarrier Subcarrier power vs symbol, vs subcarrier Mag error vs symbol, vs subcarrier Phase error vs symbol, vs subcarrier Channel frequency response Residual EVM -49 dB (WiMAX 802.16-2004, 5 MHz BW) -49 dB (WLAN 802.11g, 20 MHz BW) Signal input power optimized for best EVM WLAN IEEE802.11a/b/g/j/p (Opt. 23) Modulation formats DBPSK (DSSS-1M), DQPSK (DSSS-2M), CCK 5.5M, CCK 11M , OFDM (BPSK, QPSK, 16QAM, 64QAM) Measurements and displays Burst index, Burst power, Peak to average burst power, IQ origin offset, Frequency error, Common pilot error, Symbol clock error

RMS and Peak EVM for Pilots/Data, Peak EVM located per symbol and subcarrier

Packet header format information

Average power and RMS EVM per section of the header

WLAN power vs time, WLAN symbol table, WLAN constellation

Spectrum emission mask, spurious

Error Vector Magnitude (EVM) vs symbol (or time), vs subcarrier (or frequency)

Mag error vs symbol (or time), vs subcarrier (or frequency)

Phase error vs symbol (or time), vs subcarrier (or frequency)

WLAN channel frequency response vs symbol (or time), vs subcarrier (or frequency)

WLAN spectral flatness vs symbol (or time), vs subcarrier (or frequency)

Residual EVM - 802.11b (CCK-11 Mbps) RMS-EVM over 1000 chips, EQ On Signal input power optimized for best EVM

2.4 GHz: 1%(–40 dB) typical, 0.9% (–40.9 dB) typical-mean Residual EVM - 802.11a/g/j (OFDM, 20 MHz, 64-QAM) RMS-EVM averaged over 20 bursts, 16 symbols each Signal input power optimized for best EVM 2.4 GHz –49 dB typical, –50 dB typical-mean 5.8 GHz –49 dB typical, –50 dB typical-mean WLAN IEEE802.11n (Opt. 24) Modulation formats OFDM (BPSK, QPSK, 16 or 64QAM) Measurements and displays Burst index, Burst power, Peak to average burst power, IQ origin offset, Frequency error, Common pilot error, Symbol clock error

RMS and Peak EVM for Pilots/Data, Peak EVM located per symbol and subcarrier

Packet header format information

Average power and RMS EVM per section of the header

WLAN power vs time, WLAN symbol table, WLAN constellation

Spectrum emission mask, spurious

Error Vector Magnitude (EVM) vs symbol (or time), vs subcarrier (or frequency)

Mag error vs symbol (or time), vs subcarrier (or frequency)

Phase error vs symbol (or time), vs subcarrier (or frequency)

WLAN channel frequency response vs symbol (or time), vs subcarrier (or frequency)

WLAN spectral flatness vs symbol (or time), vs subcarrier (or frequency)

Residual EVM - 802.11n (40 MHz, 64-QAM) RMS-EVM over averaged over 20 bursts, 16 symbols each Signal input power optimized for best EVM 5.8 GHz –48 dB typical, –48.5 dB typical-mean WLAN IEEE802.11ac (Opt. 25) Modulation formats OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM) Measurements and displays Burst index, Burst power, Peak to average burst power, IQ origin offset, Frequency error, Common pilot error, Symbol clock error

RMS and Peak EVM for Pilots/Data, Peak EVM located per symbol and subcarrier

Packet header format information

Average power and RMS EVM per section of the header

WLAN power vs time, WLAN symbol table, WLAN constellation

Spectrum emission mask, spurious

Error Vector Magnitude (EVM) vs symbol (or time), vs subcarrier (or frequency)

Mag error vs symbol (or time), vs subcarrier (or frequency)

Phase error vs symbol (or time), vs subcarrier (or frequency)

WLAN channel frequency response vs symbol (or time), vs subcarrier (or frequency)

WLAN spectral flatness vs symbol (or time), vs subcarrier (or frequency)

Residual EVM - 802.11ac RMS-EVM averaged over 20 bursts, 16 symbols each Signal input power optimized for best EVM

5.8 GHz (80 MHz, 256-QAM) –48 dB typical, –48.5 dB typical-mean 5.8 GHz (160 MHz, 256-QAM) –45 dB typical, –45.5 dB typical-mean EMC pre-compliance and troubleshooting (Opt. 32)EMC pre-compliance and troubleshootingStandards EN55011, EN55012, EN55013, EN55014, EN55015, EN55025, EN55032, EN60601, DEF STAN, FCC Part 15, FCC Part18, MIL-STD 461G Features EMC-EMI display, Wizard to setup accessories and limit lines, Inspect, Harmonic Markers, Level Target, Compare Traces, Measure Ambient, Report generation, Re-measure Spot Detectors +Peak, Avg, Avg (of logs), Avg (VRMS), CISPR QuasiPeak, CISPR Peak, CISPR Average, CISPR Average of Logs, MIL +Peak, DEF STAN Avg, DEF STAN Peak

Limit lines Up to 3 Limit Lines with corresponding margins Resolution BW Set per standard or user definable Dwell time Set per standard or user definable Report format PDF, HTML, MHT,RTF, XLSX, Image File format Accessory type Antenna, Near Field Probe, Cable, Amplifier, Limiter, Attenuator, Filter, Other Correction format Gain/Loss Constant, Gain/loss table, Antenna Factor Traces Save/recall up to 5 traces, Math trace (trace1 minus trace2), Ambient trace APCO P25 (Option 26)Modulation formats Phase 1 (C4FM), Phase 2 (HCPM, HDQPSK) Measurements and displays RF output power, operating frequency accuracy, modulation emission spectrum, unwanted emissions spurious, adjacent channel power ratio, frequency deviation,

modulation fidelity, frequency error, eye diagram, symbol table, symbol rate accuracy,

transmitter power and encoder attack time, transmitter throughput delay, frequency

deviation vs. time, power vs. time, transient frequency behavior, HCPM transmitter logical

channel peak adjacent channel power ratio, HCPM transmitter logical channel off slot power,

HCPM transmitter logical channel power envelope, HCPM transmitter logical channel time alignment

Residual modulation fidelity Phase 1 (C4FM) ≤1.0% typical Phase 2 (HCPM) ≤0.5% typical Phase 2 (HDQPSK) ≤0.4% typical Adjacent channel power ratio 3025 kHz offset from the center and bandwidth of 6 kHz Phase 1 (C4FM): -74 dBc typical Phase 2 (HCPM): -74 dBc typical Phase 2 (HDQPSK): -75 dBc typical 62.5 kHz offset from the center and bandwidth of 6 kHz -75 dBc typical Bluetooth (Options 27 and 31)Modulation formats Bluetooth Basic Rate, Bluetooth Low Energy, Enhanced Data Rate - Revision 4.2, Bluetooth® 5 when option 31 is enabled Measurements and displays Peak power, average power, adjacent channel power or inband emission mask,

-20 dB bandwidth, frequency error, modulation characteristics including ΔF1avg (11110000),

ΔF2avg (10101010), ΔF2 > 115 kHz, ΔF2/ΔF1 ratio, frequency deviation vs. time with packet and octet

level measurement information, carrier frequency f0, frequency offset (Preamble and Payload), max

frequency offset, frequency drift f1-f0, max drift rate fn-f0 and fn-fn-5, center frequency

offset table and frequency drift table, color-coded symbol table, packet header decoding information,

eye diagram, constellation diagram

Output power (average and peak) Level uncertainty Refer to instrument amplitude and flatness specification Measurement range > -70 dBm Modulation characteristics (ΔF1avg, ΔF2avg, ΔF2avg/ ΔF1avg, ΔF2max ≥115 kHz)Deviation range ± 280 kHz Deviation uncertainty (at 0 dBm) Measurement resolution10 Hz Measurement rangeNominal channel frequency ±100 kHz Initial Carrier Frequency Tolerance (ICFT) Measurement uncertainty (at 0 dBm) Measurement resolution 10 Hz Measurement rangeNominal channel frequency ±100 kHz Carrier frequency drift Supported measurements Max freq. offset, drift f1- f0, max drift fn-f0, max drift fn-fn-5 (50 μs)

Measurement uncertainty Measurement resolution10 Hz Measurement rangeNominal channel frequency ±100 kHz In-band emissions and ACPLevel uncertainty Refer to instrument amplitude and flatness specification LTE Downlink RF measurements (Opt. 28)Standard Supported 3GPP TS 36.141 Version 12.5 Frame Format supported FDD and TDD Measurements and Displays SupportedAdjacent Channel Leakage Ratio (ACLR), Spectrum Emission Mask (SEM), Channel Power, Occupied Bandwidth (OBW), Error Vector Magnitude (EVM), Modulation Accuracy, Adjacent Channel Power (ACP), Power vs. Time is for uplink only showing Transmitter OFF power for TDD signals and LTE constellation diagram for PSS, SSS with Cell ID, Group ID, Sector ID, and Frequency Error. ACLR with E-UTRA bands (Nominal, with Noise Correction)1st Adjacent Channel 73 dB 2nd Adjacent Channel 74 dB 5G NR Uplink/Downlink measurements (RSA5BUP Opt. 5GNR)Standard supportedTS 38.141-1 for BS and 38.521-1 for UEModulation accuracySec 6.5.2 for BS and Sec 6.4.2 for UE.ACPSec 6.6.3 for BS and Sec 6.5.2.4 for UEFrame format supportedUplink (FDD and TDD)Downlink (FDD and TDD)Measurements and displays supportedChannel Power (CHP), Adjacent Channel Power (ACP), Power Vs Time (PVT)2, Modulation Accuracy (including Error Vector Magnitude (EVM), Frequency Error, IQ Error), EVM vs. Symbol, Occupied Bandwidth (OBW), Spectral Emission Mask (SEM), Constellation Diagram, and summary table with scalar results.EVM (typical)1 GHz3.5 GHz5 GHz7 GHz0.40%0.41%0.46%0.53%For RSA5100B Series Spectrum Analyzers: ≤44.4 dB rms EVM from 1 GHz to 7 GHz

ACLR (typical)

Mapping and field strength (Option MAP)RF field strength Signal strength indicator Located at right-side of display Measurement bandwidth Up to 165 MHz, dependent on span and RBW setting Tone type Variable frequency MappingMap types directly supported Pitney Bowes MapInfo (*.mif), Bitmap (*.bmp), Open Street Maps (.osm) Saved measurement results Measurement data files (exported results)

Map file used for the measurements

Google earth KMZ file

Recallable results files (trace and setup files)

MapInfo-compatible MIF/MID files

Analog modulation analysis accuracy (typical)AM ±2% (0 dBm input at center, carrier frequency 1 GHz, 10 to 60% modulation depth) FM ±1% of span (0 dBm input at center) (Carrier frequency 1 GHz, 400 Hz/1 kHz Input/Modulated frequency) PM ±3° (0 dBm input at center) (Carrier frequency 1 GHz, 1 kHz/5 kHz Input/Modulated frequency) Inputs and outputsFront panel Display Touch panel, 10.4 in. (264 mm) RF input connector N-type female, 50 Ω (RSA5103B, RSA5106B) N-Type Female Planar Crown (RSA5115B) 3.5mm Female Planar Crown (RSA5126B) Trigger out BNC, High: >2.0 V, Low: Trigger in BNC, 50 Ω/5 kΩ impedance (nominal), ±5 V max input, -2.5 V to +2.5 V trigger level USB ports (2) USB 2.0 Audio Speaker Rear panel 10 MHz REF OUT 50 Ω, BNC, >0 dBm External REF IN 50 Ω, 10 MHz, BNC Trig 2 / gate IN BNC, High: 1.6 to 5.0 V, Low: 0 to 0.5 V GPIB interface IEEE 488.2 LAN interface ethernet RJ45, 10/100/1000BASE-T USB ports (2) USB 2.0 VGA output VGA compatible, 15 DSUB Audio out 3.5 mm headphone jack Noise source drive BNC, +28 V, 140 mA (nominal) Turn ON time: 100 μs, Turn OFF time: 500 μs Digital I and Q out 2 connectors, LVDS (Opt. 65) Analog Zero Span Out 1 connector, BNC (Opt. 66) General characteristicsTemperature range Operating +5 °C to +40 °C Storage –20 °C to +60 °C Warm-up time 20 minutes Altitude Operating Up to 3000 m (approximately 10,000 ft.) Nonoperating Up to 12,190 m (40,000 ft.) Relative humidity Operating and nonoperating +40 °C at 95% relative humidity, meets intent of EN 60068-2-30.31Vibration Operating (except when equipped with option 56 removable SSD) 0.22GRMS . Profile = 0.00010 g2 /Hz at 5-350 Hz, -3 dB/Octave slope from 350-500 Hz, 0.00007 g2 /Hz at 500 Hz, 3 Axes at 10 min/axis Nonoperating 2.28GRMS . Profile = 0.0175 g2 /Hz at 5-100 Hz, -3 dB/Octave slope from 100-200 Hz, 0.00875 g2 /Hz at 200-350 Hz,-3 dB/Octave slope from 350-500 Hz, 0.006132 g2 /Hz at 500 Hz, 3 Axes at 10 min/axis Shock Operating 15 G, half-sine, 11 ms duration, three shocks per axis in each direction (18 shocks total) Nonoperating 30 G, half-sine, 11 ms duration, three shocks per axis in each direction (18 shocks total) Data storage Internal HDD (Opt. 61), USB ports, removable SSD (Opt. 60) PowerPower requirements 90 VAC to 264 VAC, 50 Hz to 60 Hz

90 VAC to 132 VAC, 400 Hz

Power consumption 400 W max EMC and safety complianceSafety UL 61010-1:2004 CSA C22.2 No.61010-1-04 Electromagnetic compatibility, complies with EU council EMC Directive 2004/108/EC EN61326, CISPR 11, Class A ACMA (Australia/New Zealand) FCC 47CFR, Part 15, Subpart B, Class A (USA) Physical characteristicsWith feet

Dimensions (with feet) Height 282 mm (11.1 in.) Width 473 mm (18.6 in.) Depth 531 mm (20.9 in.) Weight 29 kg (64.7 lb.) With all options. Ordering informationModelsRSA5103B Real Time Signal Analyzer, 1 Hz to 3 GHz RSA5106B Real Time Signal Analyzer, 1 Hz to 6.2 GHz RSA5115B Real Time Signal Analyzer, 1 Hz to 15 GHz RSA5126B Real Time Signal Analyzer, 1 Hz to 26.5 GHz All Include: Quick-start Manual (Printed), Application Guide, Printable Online Help File, Programmer's manual (on CD), power cord, BNC-N adapter, Front Cover.

RSA5115B also includes: Planar Crown RF Input Connector - Type N Female PN 131-4329-00

RSA5126B also includes: Planar Crown RF Input Connector - 3.5 mm Female

Note: Please specify power plug and language options when ordering.

WarrantyOne year Options, accessories, and upgradesOptionsProduct Options Description RSA5103B Real Time Signal Analyzer, 1 Hz to 3 GHz RSA5106B Real Time Signal Analyzer, 1 Hz to 6.2 GHz RSA5115B Real Time Signal Analyzer, 1 Hz to 15 GHz RSA5126B Real Time Signal Analyzer, 1 Hz to 26.5 GHz Opt. B25 25 MHz Acquisition Bandwidth (no-cost option) Opt. B40 40 MHz Acquisition Bandwidth Opt. B85 85 MHz Acquisition Bandwidth Opt. B125 125 MHz Acquisition Bandwidth Opt. B16x 165 MHz Acquisition Bandwidth Opt. B85HD 85 MHz Acquisition Bandwidth, High Dynamic Range Opt. B125HD 125 MHz Acquisition Bandwidth, High Dynamic Range Opt. B16xHD 165 MHz Acquisition Bandwidth, High Dynamic Range Opt. 300 High performance real time (Opt. 09 required) Opt. 09 Enhanced Real Time Opt. 10 AM/FM/PM Modulation and Audio Measurements (Opt. 300 required)Opt. 11 Phase Noise / Jitter Measurement Opt. 12 Settling Time (Frequency and Phase) Opt. 14 Noise Figure and Gain (Internal preamp recommended) Opt. 20 Pulse Measurements Opt. 21 General Purpose Modulation Analysis Opt. 22 Flexible OFDM Analysis Opt. 23 WLAN 802.11a/b/g/j/p measurement application Opt. 24 WLAN 802.11n measurement application (requires opt 23) Opt. 25 WLAN 802.11ac measurement application (requires opt 24) Opt. 26 APCO P25 measurement application Opt. 27 Bluetooth Basic LE Tx Measurements Opt. 28 LTE Downlink RF measurements Opt. 31 Bluetooth 5 Measurements (requires opt 27)

Opt. 32 EMC pre-compliance and troubleshooting Opt. MAP Mapping and signal strength Opt. 50 Internal Preamp, 1 MHz to 3/6.2 GHz, RSA5103B/5106B only Opt. 51 Internal Preamp, 1 MHz to 15/26.5 GHz, RSA5115B/5126B only Opt. 53 Memory Extension, 4 GB Acquisition Memory Total Opt. 6032Removable SSD, incompatible with Opt. 61 Opt. 6132Internal HDD, incompatible with Opt. 60 (no cost option) Opt. 65 Digital I and Q outputs Opt. 66 Zero-span analog output Opt. 6566 Digital I and Q outputs and Zero-span analog output Opt. PFR Precision Frequency Reference Opt. 54 Signal Classification and Survey International power plugsOpt. A0 North America power plug (115 V, 60 Hz) Opt. A1 Universal Euro power plug (220 V, 50 Hz) Opt. A2 United Kingdom power plug (240 V, 50 Hz) Opt. A3 Australia power plug (240 V, 50 Hz) Opt. A4 North America power plug (240 V, 50 Hz) Opt. A5 Switzerland power plug (220 V, 50 Hz) Opt. A6 Japan power plug (100 V, 50/60 Hz) Opt. A10 China power plug (50 Hz) Opt. A11 India power plug (50 Hz) Opt. A12 Brazil power plug (60 Hz) Opt. A99 No power cord Language optionsOpt. L0 English manual Opt. L3 Japanese manual Opt. L5 Simplified Chinese manual Opt. L7 Russian manual Service optionsOpt. C3 Calibration Service 3 Years Opt. C5 Calibration Service 5 Years Opt. CA1 Single Calibration or Functional Verification Opt. D1 Calibration Data Report Opt. D3 Calibration Data Report 3 Years (with Opt. C3) Opt. D5 Calibration Data Report 5 Years (with Opt. C5) Opt. G3 Complete Care 3 Years (includes loaner, scheduled calibration, and more) Opt. G5 Complete Care 5 Years (includes loaner, scheduled calibration, and more) Opt. R5 Repair Service 5 Years (including warranty) Recommended accessoriesRTPA2A Spectrum Analyzer Probe Adapter compatibility Supports TekConnect® probes. Compatibility: P7225 - 2.5 GHz Active Probe, P7240 - 4 GHz Active Probe, P7260 - 6 GHz Active Probe, P7330 - 3.5 GHz Differential Probe, P7350 - 5 GHz Differential Probe, P7350SMA - 5 GHz Differential SMA Probe, P7340A - 4 GHz Z-Active Differential Probe, P7360A - 6 GHz Z-Active Differential Probe, P7380A - 8 GHz Z-Active Differential Probe, P7380SMA - 8 GHz Differential Signal Acquisition System, P7313 - >12.5 GHz Z-Active Differential Probe, P7313SMA - 13 GHz Differential SMA Probe, P7500 Series - 4 GHz to 20 GHz TriMode Probes SignalVu-PC Software based on the RSA5000 Series Real Time Spectrum Analyzers puts the power of your RTSA signal analysis tools on your Windows 64-bit PC. Performs measurements on stored signals from RSA3000/5000/6000 series, RSA306/306B, RSA500A/600A series, RSA7100A, and MDO4000B/C oscilloscope RF captures. Additional Removable Hard Drive Order RSA5BUP Opt. SSD. This is an additional solid-state drive for instrument with Option 56 installed. (Windows 7 and instrument software preinstalled).DC Block Order 119-7902-00. 9 kHz-18 GHz. Type N Male to Type N Female. Voltage Rating: 50 V DC Max. Insertion Loss 0.9 dB. Aeroflex model 7003. EMI-NF-PROBE Near Field Probe set Noise source NoiseCom NC346C Series. Provides supported sources up to 55 GHz in a variety of connector types and ENR values. Contact NoiseCom for full information and to order: http://noisecom.com131-4329-xx Planar Crown RF Input Connector - 7005A-3 Type-N Female 600 Ω BNC pass-throughRequired for higher-speed noise figure measurements when ordering RSA5UP Opt 14 for RSA5000A. POMONA 4119-600 RF/COAXIAL ADAPTER, BNC PLUG-BNC JACK. Contact Pomona Electronics and distributors worldwide to order: http://pomonaelectronics.com131-9062-xx Planar Crown RF Input Connector - 7005A-6 3.5 mm Female 131-8822-xx Planar Crown RF Input Connector - 7005A-7 3.5 mm Male 131-8689-xx Planar Crown RF Input Connector – 7005A-1 SMA Female 015-0369-xx RF Adapter – N (male) to SMA (male) 119-6599-xx Power Attenuator – 20 dB, 50 W, 5 GHz Transit Case 016-2026-xx RSA56KR Rackmount Retrofit Additional Quick-start Manual (Paper) 071-3224-xx Additional Application Examples Manual (Paper) 071-3283-xx EMC accessories available from Com-Powerwww.com-power.com:

CLCE-400RF current probe 10 kHz to 400 MHzABF-900ABiconical antenna 25 MHz to 300 MHzALC-100Compact Log Periodic antenna 300 MHz to 1 GHzPAM-103Preamplifier 1 MHz to 1 GHzAT-812Antenna Tripod 0.8 to 1.5m height rangeEMC accessories available from Tekboxwww.tekbox.com:

TBPS01Near field probe set, H20, H10, H5, and E5TBCP1-150RF current monitoring probe 10 kHz to 250 MHzTBLC08Line impedance stabilization network (LISN) 50uH ACTBOH01Line impedance stabilization network (LISN) 5uH DCTBFL1Transient limiter 150 kHz to 30 MHzTBWA2Near field probe amplifier 20 dBRSA5BUP – Upgrade options for the RSA5100B seriesRSA5BUP Option description HW or SW Factory calibration required? Opt. PFR Precision Frequency Reference HW Yes Opt. SSD Additional removable solid-state drive for units equipped with Option 56. Minimum capacity 480 GB. Windows 7 and instrument software preinstalled. HW No Opt. 50 Internal Preamp

1 MHz to 3 GHz (RSA5103B) or

1 MHz to 6.2 GHz (RSA5106B)

HW Yes Opt. 51 Internal Preamp

1 MHz to 15 GHz (RSA5115B) or

1 MHz to 26.5 GHz (RSA5126B)

SW No Opt. 53 Memory Extension, 4 GB Acquisition Memory total HW No Opt. 54 Signal Classification and Survey SW No Opt. 65 Digital I and Q outputs HW No Opt. 66 Zero-span analog output HW No Opt. 6566 Digital I and Q outputs and Zero-span analog output HW No Opt. 60 Removable Solid-State Drive (460 GB), incompatible with Opt. 61 HW No Opt. 61 Internal HDD (160 GB), incompatible with Opt. 60 HW No Opt. 09 Enhanced Real Time SW No Opt. 10 AM/FM/PM Modulation and Audio Measurements (requires opt 300) SW No Opt. 11 Phase Noise / Jitter Measurements SW No Opt. 12 Settling Time (Frequency and Phase) SW No Opt. 14 Noise Figure and Gain (Internal preamp recommended) SW No Opt. 20 Pulse Measurements SW No Opt. 21 General Purpose Modulation Analysis SW No Opt. 22 Flexible OFDM Analysis SW No Opt. 23 WLAN 802.11a/b/g/j/p measurement application SW No Opt. 24 WLAN 802.11n measurement application (requires opt 23)SW No Opt. 25 WLAN 802.11ac measurement application (requires opt 24) SW No Opt. 26 APCO P25 measurement application SW No Opt. 27 Bluetooth Basic LE Tx Measurements SW No Opt. 28 LTE Downlink RF measurements SW No Opt. 5GNR5G NR Uplink/Downlink RF Power, Bandwidth, Demodulation, and Error Vector Magnitude measurements33SWNoOpt. 31 Bluetooth 5 Measurements (requires opt 27) SW No Opt. 32 EMC pre-compliance and troubleshooting SW No Opt. MAP Mapping and signal strength SW No Opt. B40 40 MHz Acquisition Bandwidth (from 25 MHz BW) SW No Opt. B85 85 MHz Acquisition Bandwidth (from 25 MHz BW) HW Yes Opt. B85E 85 MHz Acquisition Bandwidth (from 40 MHz BW) HW Yes Opt. B16x 165 MHz Acquisition Bandwidth (from 25 MHz BW) HW Yes Opt. B16xE 165 MHz Acquisition Bandwidth (from 40 MHz BW) HW Yes Opt. B16xH 165 MHz Acquisition Bandwidth (from 85 MHz BW) SW No Opt. B125 125 MHz acquisition bandwidth (from 25 MHz BW) HW Yes Opt. B125E 125 MHz acquisition bandwidth (from 40 MHz BW) HW Yes Opt. B125H 125 MHz acquisition bandwidth (from 85 MHz BW) SW No Opt. B125HD-125 High dynamic range, 125 MHz acquisition bandwidth (from 125 MHz BW) HW Yes Opt. B125HD-25 High dynamic range, 125 MHz acquisition bandwidth (from 25 MHz BW) HW Yes Opt. B125HD-40 High dynamic range, 125 MHz acquisition bandwidth (from 40 MHz BW) HW Yes Opt. B125HD-85 High dynamic range, 125 MHz acquisition bandwidth (from 85 MHz BW) HW No Opt. B16xHD-125 High dynamic range, 165 MHz acquisition bandwidth (from 125 MHz BW) HW No Opt. B16xHD-165 High dynamic range, 165 MHz acquisition bandwidth (from 165 MHz BW) HW No Opt. B16xHD-25 High dynamic range, 165 MHz acquisition bandwidth (from 25 MHz BW) HW Yes Opt. B16xHD-40 High dynamic range, 165 MHz acquisition bandwidth (from 40 MHz BW) HW Yes Opt. B16xHD-85 High dynamic range, 165 MHz acquisition bandwidth (from 85 MHz BW) HW No Opt. B16xK 165 MHz acquisition bandwidth (from 125 MHz BW) HW No Opt. B85HD-25 High dynamic range, 85 MHz acquisition bandwidth (from 25 MHz BW) HW Yes Opt. B85HD-40 High dynamic range, 85 MHz acquisition bandwidth (from 40 MHz BW) HW Yes Opt. B85HD-85 High dynamic range, 85 MHz acquisition bandwidth (from 85 MHz BW) HW No Opt. 300 High performance real time (requires opt 09)HW No 2 PVT supports Uplink frame structure only.

3 For masks >30 dB above noise floor.

4 Values displayed by the instrument may differ by 0.1 μs

5 Exact number depends on Bandwidth, Sample Rate, Acquisition time. Achieved up to 200,000 pulses

6 In spans ≤2 MHz, higher resolution data is stored.

7 18 °C to 28 °C, Ref Level ≤ -15 dBm, Attenuator Auto-coupled, Signal Level -15 dBm to -50 dBm. 10 Hz ≤ RBW ≤ 1 MHz, after alignment performed.

8 Atten. = 10 dB, CF set within 200 MHz of VSWR frequency

9 Each signal level –25 dBm, Ref level –20 dBm, Attenuator = 0 dB, 1 MHz tone separation.

10 –40 dBm at RF input, attenuator = 0, preamp off, typical

11 Measured using 1 kHz RBW, 100 kHz span, 100 averages, minimum noise mode, input terminated, log-average detector and trace function.

12 RF input level = –15 dBm, Attenuator = 10 dB, Mode: Auto. Input signal at center frequency. Center Frequency > 90 MHz, Opt. B40/B85/B16x. For acquisition bandwidth 15 - 25 MHz with signals at center frequency and at ±(37.5 MHz to 42.5 MHz): 65 dBc.

13 CF> 150 MHz for Opt.B40 / B85 / B16x / B85HD / B125HD / B16xHD

14 CF ≥ 150 MHZ for Opt. B40 / B85 / B125 / B16x.

15 -70 dBc for input signals 20 MHz above or below instrument center frequency.

16 Amplitude flatness and phase deviation over the acquisition BW, includes RF frequency response. Attenuator setting: 10 dB.

17 High dynamic range mode selected.

18 Measured input signal level > –20 dBm, Attenuator: Auto

19 For (ENR of noise source) > (measured noise figure + 4 dB)

20 Actual number depends on time length, pulse bandwidth and instrument configuration.

21 Chirp width 100 MHz, pulse width 10 μs, minimum signal delay 1% of pulse width or 10/(chirp bandwidth), whichever is greater, and minimum 2000 sample points during pulse on-time.

22 Pulse width >300 ns (100 ns, Opt. B85/B16x) SNR ≥30 dB

23 Pulse ON Power ≥ -20 dBm, Signal peak at reference Level, Attenuator = Auto, t meas - t reference ≤ 10 ms, Frequency estimation: Manual. Pulse-to-Pulse measurement time position excludes the beginning and ending of the pulse extending for a time = (10 / Measurement BW) as measured from 50% of the t (rise) or t (fall) . Absolute frequency error determined over center 50% of pulse.

24 Signal type: Linear chirp, Peak-to-Peak chirp deviation: ≤0.8 Measurement BW, Pulse ON Power ≥ -20 dBm, Signal peak at reference Level, Attenuator = 0 dB, tmeas - treference ≤ 10 ms, Frequency estimation: Manual. Pulse-to-Pulse measurement time position excludes the beginning and ending of the pulse extending for a time = (10 / Measurement BW) as measured from 50% of the t(rise) or t(fall). Absolute frequency error determined over center 50% of pulse.

25 CF = 2 GHz, Measurement filter = Root raised cosine, Reference filter = Raised cosine, Analysis length = 200 symbols.

26 CF = 2 GHz, Measurement filter = Root raised cosine, Reference filter = Raised cosine, Analysis length = 400 symbols 20 averages.

27 Reference Filter: MIL STD Measurement Filter: none.

28 Reference Filter: MIL STD.

29 Reference filter: None, Measurement filter: None.

30 Measured with test signal amplitude adjusted for optimum performance if necessary. Measured with Averaging, 10 waveforms.

31 Frequency amplitude response may vary up to ±3 dB at +40 °C and greater than 45% relative humidity.

32 Must order either Opt. 60 or 61.

33 The 5GNR license is available as a standalone item, not as an option to your hardware, therefore it is considered a post-purchase upgrade and not installed at the time of purchase of the instrument.

Tektronix is ISO 14001:2015 and ISO 9001:2015 certified by DEKRA. Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats. Bluetooth is a registered trademark of Bluetooth SIG, Inc. LTE is a trademark of ETSI. 37W-26274-22

About Tektronix

We are the measurement insight company committed to performance, and compelled by possibilities. Tektronix designs and manufactures test and measurement solutions to break through the walls of complexity, and accelerate global innovation.

LEARN MORE ABOUT US

Company

About Us Careers Newsroom Events EA Elektro-Automatik

Help & Learning

Contact Us Contact Technical support Learning Center Owner Resources Blog

Partners

Find a Partner

Connect With Us

Additional Links

© 2026 TEKTRONIX, INC.

Sitemap Privacy Terms of Use Terms and Conditions Call us at Feedback